RVK 125 mm Extractor L1 (365 m3/h)

Extractor RVK 125 mm. L1 (365 M3/H) Ventilation in indoor cultivation

The Extractor RVK 125 mm. L1 (365 M3/H) has established itself as a reliable reference for small and medium-sized grow tents and rooms. The high-strength technical plastic housing withstands humid environments and long working hours, while the centrifugal turbine provides enough pressure to work with carbon filters and short duct runs.

The 125 mm outlet allows direct connection to 127 mm flexible duct using clamps, achieving a tight seal that prevents air leaks. The L1 model stands out for a nominal flow rate of 365 m³/h, reference noise level around 55 dB(A), and approximate power of 60 W, balanced values for installations that require constant renewal without increasing noise.

This equipment stabilizes temperature and humidity, helps maintain CO₂ at appropriate levels, and improves gas exchange throughout the canopy. Combined with a carbon filter of the same diameter, the RVK line performs especially well in modern LED grow tents and drying areas, where ventilation must be gentle, continuous, and effective.

In the Hydroponics Blanes catalog, Grow Shop in Spain, you will find ducts, reducers, clamps, controllers, and the rest of the cannabis cultivation accessories to complete a functional and safe extraction circuit.

Specialized attention from a trusted Grow Shop and the option of discreet shipping make setup easier.

In addition, the compact format fits easily in cheap indoor grow tents and custom configurations.

Indoor Cultivation Extractor RVK 125 mm. L1 (365 M3/H)

In indoor cultivation climate control is critical. Extractor RVK 125 mm. L1 (365 M3/H) constantly renews air, removes excess heat and water vapor, and reduces the appearance of hot spots. The stable flow limits stratification and promotes a homogeneous microclimate from the base to the top area.

What is the Extractor RVK 125 mm. L1 (365 M3/H) for?

• 24/7 air renewal: removal of heat and humidity to maintain proper VPD.
• Odor control: easy integration with 125 mm carbon filter.
• Useful pressure: ability to overcome losses in bends and short runs.
• Energy efficiency: high flow with moderate consumption around 60 W.

Indoor cultivation accessory Extractor RVK 125 mm. L1 (365 M3/H)

Among the essential cannabis cultivation accessories, this extractor provides robustness, reliability, and compatibility with industry standards. Durable plastic material, balanced centrifugal impeller, and 125 mm flanges ensure quick integration with flexible or rigid ducts, grilles, silencers, and environmental controllers.

What is the Extractor RVK 125 mm. L1 (365 M3/H) used for?

Recommended use as the main extractor in 80×80, 100×100, or 120×120 cm tents (always sizing according to lighting power and duct run); as an intake fan for supplying filtered fresh air; and as support in drying rooms, where continuous flow is needed to avoid humidity spikes and improve process uniformity.

How to use Extractor RVK 125 mm. L1 (365 M3/H)

1. Calculate target flow: room volume (m³) × air changes/hour (30–60 as a reference) and add losses for filter and bends.
2. Install the extractor at the top of the tent to evacuate the hottest air; place the air intake at the bottom to create a uniform sweep.
3. Connect to 125–127 mm duct; seal joints with aluminum tape and secure with clamps to prevent leaks.
4. Attach 125 mm carbon filter if odor neutralization is needed; select a model compatible with 365 m³/h.
5. Minimize bends and long runs to maintain pressure and reduce aerodynamic noise.
6. Check draft with a manual test or anemometer; check for possible vibrations and adjust fastenings.
7. Plan light maintenance: clean grilles, check ducts, and periodically inspect the condition of clamps.

Advantages of using Extractor RVK 125 mm. L1 (365 M3/H)

• Quiet in continuous operation, ideal for domestic spaces.
• Balanced flow of 365 m³/h with stable centrifugal thrust.
• Moderate consumption around 60 W for prolonged work.
• Robust construction in technical plastic prepared for humid environments.
• Compatibility with 125–127 mm ducts, filters, and silencers.

Where to buy an Extractor RVK 125 mm. L1 (365 M3/H) online?

Available at Hydroponics Blanes, with specialized advice from a trusted Grow Shop, the option of discreet shipping, and all the equipment for indoor cultivation: controllers, ducts, filters, silencers, and cheap indoor grow tents. Secure shopping at a Grow Shop in Spain with extensive experience.

For those looking for contained power, quick assembly, and climate stability, Extractor RVK 125 mm. L1 (365 M3/H) represents a practical solution.

Durable housing, centrifugal thrust, and compatibility with filtration make this model a reliable ally for domestic and semi-professional projects backed by Hydroponics Blanes and a discreet shipping service.