InLine Extractor Fan 125 mm Vanguard

Compact axial fan - InLine Extractor 125 mm. Vanguard

The InLine Extractor 125 mm. Vanguard is designed to constantly renew air in indoor installations that require a stable flow, low noise, and energy efficiency. The ABS plastic housing provides resistance to moisture, while the axial design impeller offers effective thrust over short distances.

The technical sheet indicates a maximum flow of 190 m³/h, ≈2400 r.p.m., and a consumption of 20 W, figures that fit medium cabinets, mother rooms, and propagation areas.

The single-phase motor integrates thermal protection against overheating, providing operational safety during long working hours. Thanks to the Ø125 mm outlet, it fits effortlessly to flexible ducts, grilles, sleeves, and standard accessories. This in-line format is ideal for introducing fresh air, supporting lines with several bends, or evacuating heat sources near luminaires.

Technical note: axial extractors of this size work best in sections ≤ 2 m and are not intended for carbon filters due to low static pressure.

Available at Hydroponics Blanes, Grow Shop in Spain, within a wide catalog of cannabis cultivation accessories, ducts, and cheap indoor grow tents, with discreet shipping and service from a trusted Grow Shop.

Indoor Growing InLine Extractor 125 mm. Vanguard

Proper ventilation stabilizes temperature, reduces excessive humidity, and maintains adequate CO₂ levels. InLine Extractor 125 mm. Vanguard provides continuous flow in medium cabinets and compact rooms, avoiding hot spots and promoting a homogeneous microclimate for all plants.

What is the InLine Extractor 125 mm. Vanguard for?

• Introduce fresh air: direct supply from outside to balance pressure and RH.
• Support for main extraction: reinforcement in lines with losses due to bends or length.
• Localized ventilation: heat removal in areas near lights or duct pass-throughs.
• Directed circulation: continuous movement in areas with little airflow.

Indoor growing accessory InLine Extractor 125 mm. Vanguard

Among the essential cannabis cultivation accessories, this model stands out for its quick assembly, low noise impact, and contained consumption. The fit in a 125 mm duct allows discreet installation behind cabinets or false ceilings, combining it with grilles, backdraft valves, and timers for scheduled air renewal.

What is the InLine Extractor 125 mm. Vanguard used for?

It is used as the main intake fan in medium cabinets, as support in long duct runs, for ventilation in small greenhouses or mother rooms, and as an aid in drying rooms, where a gentle and constant flow is needed to prevent moisture buildup and temperature differences.

How to use InLine Extractor 125 mm. Vanguard

1. Define objective: air supply, extraction support, or spot ventilation.
2. Plan a route of ≤ 2 m to preserve 190 m³/h and minimize losses.
3. Insert the extractor body into the Ø125 mm duct, respecting the flow arrow.
4. Secure with clamps and seal joints with aluminum tape to prevent leaks and vibrations.
5. Make proper electrical connection; the motor includes thermal protection.
6. Check flow with hand or anemometer and direct outlets to sweep dead zones.
7. Schedule maintenance: clean grilles and check tightness periodically.

Advantages of using InLine Extractor 125 mm. Vanguard

• Energy efficiency with 20 W consumption and 190 m³/h flow.
• Silent operation typical of duct axial fans.
• Compact format that fits in narrow spaces and short duct runs.
• Direct installation in 125 mm duct with standard accessories.
• Safety thanks to single-phase motor with thermal protection.

Where to buy an InLine Extractor 125 mm. Vanguard online?

At Hydroponics Blanes, a trusted Grow Shop, the InLine Extractor 125 mm. Vanguard is available with discreet shipping and advice to size ventilation according to cabinet size, lighting power, and duct layout. Complete catalog of Indoor growing, controllers, ducts, and cheap indoor grow tents with secure purchase at Grow Shop in Spain.

Highlighted technical features: Dimension/outlet 125 mm • Max flow 190 m³/h • Max speed ≈2400 r.p.m. • Consumption 20 W • Resistant ABS housing • Single-phase motor with thermal protection. Aimed at low/medium flows in short runs without carbon filter.

InLine Extractor 125 mm. Vanguard offers reliable air renewal with minimal consumption and simple assembly, ideal for medium cabinets, mother rooms, and rooting areas.

Clear integration with standard ducts, compatibility with common accessories, and immediate availability at Hydroponics Blanes with discreet shipping make this model the perfect ally to stabilize the microclimate in any Indoor growing project.