Bluelab pH 7.0 Calibration Solution – 250 ml

PH7.0 CALIBRATION SOLUTION 250 ml. BLUELAB

By using the Bluelab® pH 7.0 calibration solution, you will be able to maintain the accuracy and reliability of the brand's pH meters, resulting in more precise and dependable measurements in your gardening, hydroponics, aquaculture, or other projects where accurate pH measurement is essential. The calibration solution meets laboratory standards, guaranteeing the quality of Bluelab® products and ensuring that they maintain their accuracy for longer.

Instructions for use PH7.0 CALIBRATION SOLUTION 250 ml. BLUELAB:

1. Preparation: Before using the pH 7.0 calibration solution, make sure that the probe or electrode of the pH meter is clean and in good condition. Clean the probe with distilled water and gently dry it before calibrating.

2. Shaking: Shake the bottle of the pH 7.0 calibration solution well to ensure a homogeneous mixture before using it.

3. Calibration: Immerse the probe or electrode of the pH meter in the pH 7.0 calibration solution and wait a few seconds until the reading stabilizes. Adjust the calibration of the meter so that it shows the exact value of pH 7.0.

4. Verification: After calibrating with the pH 7.0 solution, it is also recommended to perform an additional calibration with a pH 4.0 calibration solution to verify the accuracy of the meter at both ends of the pH range.

5. Cleaning and maintenance: Clean the probe or electrode of the pH meter with a suitable cleaning solution after each use to remove any residue or contaminant that may affect the measurements. In addition, it is recommended to calibrate the meters periodically, depending on use and environmental conditions, to maintain accuracy over time.