Bluelab pH 4.0 Calibration Solution – 250 ml Bottle

pH 4.0 Bluelab calibration solution 250 ml bottle.

The Bluelab pH 4.0 calibration solution, like other quality calibration solutions, is standardized and manufactured following established formulas. This ensures accuracy and reliability of the measurements. Careful handling and good cleaning of the probe or electrode are essential to obtain accurate and reliable results in pH measurements.

Instructions for use pH 4.0 Bluelab calibration solution 250 ml bottle:

Preparation: Before using the pH 4.0 calibration solution, make sure that the pH probe or meter is clean and in good condition. Clean the probe with distilled water if necessary and make sure it has no residue or contaminants.

Agitation: Shake the bottle of the pH 4.0 calibration solution well before use to ensure a homogeneous mixture.

Calibration: Immerse the pH probe or meter in the pH 4.0 calibration solution and wait a few seconds until the reading stabilizes. Adjust the calibration of the device so that it reads exactly 4.0 on the display. Check your device's manual to find out how to make this adjustment.

Verification: After calibrating with the pH 4.0 solution, it is also advisable to perform an additional calibration with a pH 7.0 calibration solution to verify the accuracy of the meter at a midpoint.

Storage: Make sure to close the bottle of the pH 4.0 calibration solution tightly and store it in a cool, dark place to maintain its quality.