Replacement Rectangular Ultrasonic Humidifier 10 Membranes

One of the most important factors when it comes to carrying out an indoor cannabis cultivation is maintaining adequate humidity levels. For this purpose, you can buy a 12-membrane ultrasonic humidifier, especially for large crops in grow tents or rooms.

It is very easy to install, just put a bucket or tank with water, preferably distilled, place the float and the membrane inside. Plug it in and it immediately starts to generate a thick, cold mist inside the grow area, micro-droplets of water that float in the air and increase the humidity level.

* The use of distilled or reverse osmosis water is recommended to prolong its useful life *

The float is NOT INCLUDED with the 12-membrane ultrasonic humidifier

If when using the ultrasonic humidifier we see that it no longer generates the desired mist, it is possible that the membranes have been damaged by lime or another reason. At Hydroponics Blanes we have replacement ceramic membranes. They are replaced very easily and are not expensive.

It is a compact and efficient device to place inside grow tents and is easy to install.

12-membrane ultrasonic humidifier features:

    12-membrane ultrasonic humidifier, 20mm
    Mist generated: 960ml/h
    Water consumption: 6000ml/hour
    Diffusion capacity: 5lt/hour
    20mm membranes
    Dimensions: Ø150x55mm
    CE certified
    Power: 300w
    Power supply: 230 V, 50 Hz
    Consumption: 300 watts
    Dimensions: 150 x 50 mm (diameter, height)
    Operating temperature (water): 5 to 5 ºC
    Power cable length: 10 meters


Online Grow Shop with the best prices and free shipping from €40 (maximum 25 kg.) Hydroponics Blanes. Everything you need for the installation and maintenance of indoor crops, you have it on our website.

24/48 hour shipping throughout Spain (Depending on available stock)