Ultrasonic Humidifier 1 Membrane

Maintain humidity in indoor cultivation Ultrasonic humidifier 1 membrane

This ultrasonic humidifier with 1 membrane works by vibrating a ceramic disc that generates suspended microdroplets, increasing the relative humidity without raising the ambient temperature. Perfect for sensitive phases of cannabis (cuttings, seedlings, and vegetative growth), it helps stabilize the VPD and reduces water stress. Startup is straightforward: a container with water (preferably distilled or osmosis), the mister inside, electrical connection, and the mist appears immediately. Remember that the float is not included and is purchased separately as a Float for 1 membrane humidifier. When the membrane loses performance due to scale or wear, at Hydroponics Blanes there are ceramic membrane replacements that are affordable and easy to replace. Compact, efficient equipment designed to integrate with cheap indoor grow tents and other cannabis cultivation accessories available at a specialized Grow Shop in Spain.

Indoor Cultivation Ultrasonic humidifier 1 membrane

In controlled spaces, keeping the humidity within optimal ranges prevents foliar dehydration and promotes gas exchange. The Ultrasonic humidifier 1 membrane provides a cool mist with uniform distribution, enhancing rooting, vegetative vigor, and a healthy canopy appearance. Due to its size and low consumption, it fits cabinets from 60–120 cm and small grow rooms.

What is the Ultrasonic humidifier 1 membrane used for?

• Increase and stabilize relative humidity within suitable ranges for each phase.
• Improve VPD and reduce water stress in cuttings and seedlings.
• Compensate for dry environments caused by extractors and heating.
• Optimize nutrient absorption and leaf turgor.

Indoor cultivation accessory Ultrasonic humidifier 1 membrane

It integrates with controllers, hygrometers, and timers. With a compatible float, the water level remains stable for constant mist production. Ideal as part of the cannabis cultivation accessories kit along with carbon filters, ventilation, and LED lighting.

What is the Ultrasonic humidifier 1 membrane used for?

Typical use in cloning and vegetative phase, when high humidity is needed (70–85% for clones, 60–75% in vegetative). Also useful in early flowering to avoid sharp drops due to air extraction. It does not increase temperature, so it maintains stable conditions in hot environments.

How to use Ultrasonic humidifier 1 membrane

1. Place a clean container with distilled or osmosis water. Recommendation to extend useful life.
2. Insert the device and, if desired, add float for 1 membrane (sold separately).
3. Connect to power and check for cool mist generation.
4. Adjust times with a timer or humidity controller to maintain the target range.
5. Perform periodic maintenance: gentle cleaning of the membrane and water change.

Advantages of using Ultrasonic humidifier 1 membrane

• Immediate mist without added heat.
• Quick installation and compact format for cabinets.
• Compatible with humidity controllers and timers.
• Membrane replacements available at Hydroponics Blanes.
• Affordable solution for cheap indoor grow tents.

Where to buy an Ultrasonic humidifier 1 membrane online?

Available at Hydroponics Blanes, a trusted Grow Shop with discreet shipping and specialized service at a Grow Shop in Spain. Easy ordering, fast delivery, and advice to integrate with other cannabis cultivation accessories and Indoor cultivation.

Technical specifications of the ultrasonic humidifier 1 membrane:

• Input voltage: 230 V / 50 Hz • Output: AC 24 V • 1000 mA • 24 W
• Consumption: <1.0 A
• Membrane: 20 mm (ceramic)
• Mist diffusion: 90 ml/h approx.
• Water consumption: ≥ 573 ml/h
• Required water level: 30–50 mm (from the ceramic surface)
• Water temperature: +5 ºC to +40 ºC
• Cable length: 1.8 m
• Dimensions: Ø45 × 45 mm
• Capacity per membrane: ~0.3 L/h

Usage recommendation: use distilled or osmosis water to minimize scale and extend the life of the ceramic membrane. When the mist decreases, replace the disc with a replacement. For level stability, add a compatible float (not included).

Service and shipping: online store with competitive prices and free shipping from €40 (maximum weight 25 kg). 24/48 h shipping throughout Spain, depending on stock. Specialized service in Indoor cultivation and a complete catalog of cannabis cultivation accessories.

For small spaces that require stable humidity without raising the temperature, the Ultrasonic humidifier 1 membrane offers uniform mist, simple assembly, and accessible maintenance. Practical solution for cloning, rooting, and growing with guarantees inside cheap indoor grow tents.

The Hydroponics Blanes catalog brings together everything you need: from this mist generator to controllers, floats, and replacements, with fast discreet shipping and technical support from a true trusted Grow Shop in the Grow Shop in Spain scene.