RVK 125 mm Extractor A1 (225 m3/h)

RVK Extractor 125 mm. A1 (225 M3/H) - Air circulation in indoor cultivation

The RVK Extractor 125 mm. A1 (225 M3/H) is designed to manage ventilation in small and medium-sized grow tents and rooms. The technical plastic housing provides great resistance and reduces vibrations; the centrifugal impeller balances pressure and airflow to move air continuously even with short duct runs, gentle bends, and suitable filters.

The A1 model reaches a nominal performance of 225 m³/h and a maximum indicative value close to 220 m³/h depending on installation, with an approximate consumption of 29 W, an ideal figure for equipment that must work many hours each day.

The coupling to a 127 mm flexible duct simplifies integration into tent duct ports and dome extractors, achieving a regular flow that helps remove heat, excess humidity, and odors when the circuit includes filtration.

This extractor stands out for its ease of assembly with clamps, minimal maintenance, and long service life.

In the Hydroponics Blanes catalog, Grow Shop in Spain, it appears alongside controllers, ducts, grilles, reducers, and a wide range of cannabis cultivation accessories and cheap indoor grow tents, with the close attention of a trusted Grow Shop and discreet shipping to your home.

Indoor Cultivation RVK Extractor 125 mm. A1 (225 M3/H)

A well-sized extraction maintains temperature and humidity within optimal ranges, avoids dead zones, and renews CO₂. RVK Extractor 125 mm. A1 (225 M3/H) provides sufficient airflow for compact tents with LED or CMH lighting, ensuring a stable microclimate throughout the cycle.

What is the RVK Extractor 125 mm. A1 (225 M3/H) for?

• Continuous air renewal: removal of heat and vapor to maintain proper VPD.
• Odor control: easy integration with 125 mm carbon filter (depending on pressure drop).
• Climate stability: reduction of humidity spikes during night periods and drying.
• Energy efficiency: useful airflow with low consumption of 29 W.

Indoor cultivation accessory RVK Extractor 125 mm. A1 (225 M3/H)

Considered among the essential cannabis cultivation accessories, this extractor offers a combination of robustness, silence, and compatibility with industry standards. High-strength plastic material, reliable motor, and centrifugal turbine allow continuous use without major maintenance tasks.

What is the RVK Extractor 125 mm. A1 (225 M3/H) used for?

Recommended use as the main extractor in 80×80, 100×100 tents or similar (always sizing according to power and duct run), as an intake fan to provide filtered fresh air, or as support in drying rooms, where a gentle and constant flow is needed to avoid moisture pockets.

How to use RVK Extractor 125 mm. A1 (225 M3/H)

1. Calculate airflow requirement: tent volume (m³) × air changes/hour (30–60 as reference) and add losses for filter and bends.
2. Install in a high area to extract accumulated hot air; place the air inlet at the bottom to create a homogeneous sweep.
3. Attach to 125–127 mm duct with clamps; seal joints with aluminum tape to prevent leaks.
4. Integrate carbon filter if odor control is needed; choose a model compatible with 225 m³/h airflow.
5. Check draft with manual test or anemometer; check for vibrations and adjust fastenings if structural noises appear.
6. Plan light maintenance: cleaning grilles and checking ducts to maintain nominal performance.

Advantages of using RVK Extractor 125 mm. A1 (225 M3/H)

• Quiet in continuous operation, ideal for domestic spaces.
• Low consumption of ≈29 W with good thrust for compact tents.
• Durable construction in technical plastic prepared for humid environments.
• Compatibility with 125–127 mm ducts, filters, reducers, and light silencers.
• Easy assembly with few tools and very short installation time.

Where to buy RVK Extractor 125 mm. A1 (225 M3/H) online?

At Hydroponics Blanes you can find the RVK Extractor 125 mm. A1 (225 M3/H) with technical support, discreet shipping and everything you need for Indoor cultivation: controllers, ducts, filters, and cheap indoor grow tents. Safe purchase at a Grow Shop in Spain with extensive experience.

Indicative technical data sheet: Nominal airflow 225 m³/h • Max. airflow ≈220 m³/h (depending on installation) • Outlet 125 mm (compatible with 127 mm flexible) • Consumption 29 W • Type Model A1 • Centrifugal turbine • High-strength plastic housing.

For those looking for reliable and efficient ventilation in compact spaces, RVK Extractor 125 mm. A1 (225 M3/H) provides a balance between airflow, quietness, and ease of integration.

With the support of Hydroponics Blanes, a trusted Grow Shop with discreet shipping, it is easy to complete Indoor cultivation installations with consistent performance and compatible components.