Blauberg Centro 200 Extractor Fan 780 m3/h

Extractor Centro 200 Blauberg 780 M3/h

The Extractor Centro 200 Blauberg 780 M3/h is designed for indoor installations that require useful duct pressure and stable flow even with a 200 mm carbon filter, bends, and medium tube sections.

The ABS plastic housing is resistant to ambient humidity, while the centrifugal assembly with backward-curved blades delivers solid performance in continuous tasks. A single-phase motor with overload protection and automatic restart provides operational safety.

Highlighted parameters: 780 m³/h airflow, 107 W power, 0.47 A current, ≈48 dB sound level, 2660 RPM, dimensions 276 × 340 mm, weight 3 kg, and IPX4 splash protection. The working thermal range -25 ºC to +55 ºC allows stable operation all year round.

It is advisable to incorporate a potentiometer or fan-controller to adjust extraction according to season, light power, and cycle phase.

Available at Hydroponics Blanes, Grow Shop in Spain, with discreet shipping and a wide catalog of cannabis cultivation accessories and cheap indoor grow tents.

Indoor Growing Extractor Centro 200 Blauberg 780 M3/h

In indoor growing projects, proper extraction stabilizes temperature, reduces excess humidity, renews CO₂, and helps with odor management. Extractor Centro 200 Blauberg 780 M3/h stands out in large tents or compact rooms that require pressure to overcome losses in filters and silencers while maintaining steady flow.

What is the Extractor Centro 200 Blauberg 780 M3/h for?

• Stale air evacuation: heat, humidity, and aromatic compounds leave the enclosure.
• Climate stability: helps maintain RH and temperature within target ranges.
• Efficient gas exchange: promotes transpiration and assimilation in each phase of the cycle.
• Integration with filtration: direct coupling to 200 mm carbon filter for odor control.

Indoor growing accessory Extractor Centro 200 Blauberg 780 M3/h

Among the essential cannabis cultivation accessories, this model balances airflow and pressure. The backward-curved rotor maintains performance with demanding layouts; the ABS housing facilitates installation and vibration damping. Complements climate controllers, flexible or rigid ducts, and silencers for efficient ventilation.

What is the Extractor Centro 200 Blauberg 780 M3/h used for?

It is used as the main extractor in large format tents (e.g., 120×240 or 150×150 cm, depending on heat load) and in small rooms where a flow that supports filter and bends is needed. It also performs well in drying rooms and propagation areas to avoid nighttime humidity spikes and hot spots during the photoperiod.

How to use Extractor Centro 200 Blauberg 780 M3/h

1) Calculate airflow requirement: room volume (m³) × air changes/h (e.g., 30–60).
2) Place at the top to extract accumulated hot air.
3) Connect to duct and 200 mm carbon filter with clamps; minimize bends and long sections.
4) Seal joints with aluminum tape to prevent odor leaks and pressure losses.
5) Add fan-controller or approved potentiometer if fine flow adjustment is required.
6) Check draft with hand or anemometer; periodically check fixings and vibrations.
7) Keep filter and ducts clean to maintain 780 m³/h and stable noise level.

Advantages of using Extractor Centro 200 Blauberg 780 M3/h

• 780 m³/h airflow with good useful pressure for circuits with filter and silencer.
• Sound level ≈48 dB in well-damped installations.
• Single-phase motor with overload protection and automatic restart.
• Balanced consumption of 107 W and current of 0.47 A.
• Wide thermal range (-25 ºC to +55 ºC) and IPX4 splash protection.
• Compact dimensions 276 × 340 mm and weight 3 kg that facilitate installation on wall, ceiling, or structure.

Where to buy Extractor Centro 200 Blauberg 780 M3/h online?

Available at Hydroponics Blanes, trusted Grow Shop with discreet shipping. Complete catalog of indoor growing, filters, controllers, and cheap indoor grow tents, as well as advice to size extraction according to LED power, tube length, and pressure losses. Secure purchase at Grow Shop in Spain; shipping throughout Spain in 24/48 h and 5% discount code for the next order.

Technical specifications: Outlet: 200 mm • Airflow: 780 m³/h • Power supply: 230 V / 50 Hz • Power: 107 W • Current: 0.47 A • Operating temperature: -25 ºC to +55 ºC • Speed: 2660 RPM • Sound level: 48 dB • Dimensions: 276 × 340 mm • Weight: 3 kg • Protection: IPX4.

The Extractor Centro 200 Blauberg 780 M3/h offers a convincing balance between airflow, pressure, and silence to maintain a controlled microclimate indoors.

Easy integration with standard filters and ducts, available at Hydroponics Blanes with discreet shipping and technical support to configure efficient systems in any growing space.