Fission LED 600W V2.0

Buy Online Fission LED 600W V2.0

Artificial lighting allows you to control one of the most important factors in the development of plants grown indoors.

The Fission LED 600W V2.0 from Pure Factory is designed for installations that require high photosynthetic light output, balanced distribution, and the ability to adjust power according to growing conditions.

This improved version of the Fission Board family incorporates Quantum Board technology with SANAN LED diodes, combining different color temperatures and wavelengths to offer a mixed spectrum adaptable to different plant stages.

With a nominal power of 600 W, a photosynthetic efficacy of 2.4 µmol/J, and a photosynthetic photon flux of 1,440 µmol/s, it provides a light source intended for surfaces of approximately 150 x 150 cm.

The unit also integrates a four-position intensity regulator that allows you to adapt the operation to young plants, growing specimens, and flowering crops.

Thanks to these features, it represents an alternative for organizing indoor grow installations with a single dimmable light fixture.

What is Fission LED 600W V2.0?

The Fission LED 600W V2.0 is a horticultural luminaire from Pure Factory that uses LED technology to provide usable light radiation for plants during photosynthesis. It is the most powerful model within the Fission LED V2.0 series, a range designed for different sizes of grow installations.

The Fission 600W LED Panel incorporates SANAN diodes distributed on a Quantum Board lighting structure. This configuration allows you to combine different shades of white light with specific emitters from other regions of the spectrum, achieving lighting suitable for different moments of the plant cycle.

The Fission V2.0 LED Luminaire uses 3000 K and 5000 K diodes, accompanied by 660 nm, 395 nm, and 730 nm emitters. The combination is aimed at providing a versatile light source for mother plants, rooted cuttings, vegetative growth, and flowering.

Another important feature is the integrated intensity regulator, which allows you to select four operating positions: 40%, 60%, 80%, and 100%. This function makes it easy to modify the amount of light emitted without keeping the unit permanently at maximum power.

The main technical features of the Fission LED 600W V2.0 are:

• Manufacturer: Pure Factory.
• Model: Fission LED 600W V2.0.
• Technology: LED Quantum Board.
• Nominal power: 600 W.
• Recommended surface: approximately 150 x 150 cm.
• Photosynthetic efficacy: 2.4 µmol/J.
• Photosynthetic photon flux (PPF): 1,440 µmol/s.
• Intensity regulation: 40%, 60%, 80%, and 100%.
• Nominal input voltage: 220-240 V / 50-60 Hz.
• Input voltage range: 175-264 V.
• Input current at 100%: 2.72-2.5 A.
• Power factor: greater than 0.95.
• LED source: SANAN.
• 3000 K diodes: 790 units.
• 5000 K diodes: 390 units.
• 660 nm diodes: 172 units.
• 395 nm diodes: 8 units.
• 730 nm diodes: 8 units.
• Approximate dimensions: 600 x 600 x 80 mm.
• Weight: 7.1 kg.

These specifications make the unit a LED lighting system for indoor growing suitable for installations that require considerable power, wide light distribution, and different regulation possibilities.

What is Fission LED 600W V2.0 used for?

The Fission LED 600W is used to provide artificial lighting to plants grown in indoor spaces where natural light is insufficient or unavailable. The combination of LED diodes generates photosynthetically active radiation, necessary for processes related to plant growth and development.

During vegetative growth, properly adjusted lighting contributes to the development of leaves, stems, and plant structures. The adjustable power allows you to modify the intensity according to the size of the plants, the distance from the panel, and the light needs of each species.

In the flowering phase, the mixed spectrum incorporates wavelengths that allow for adequate lighting during reproductive development. The high emission of photosynthetic photons makes it easy to work on large surfaces, as long as the light distribution and environmental conditions are appropriate.

This LED lighting for indoor growing can also be used to maintain mother plants and support the development of seedlings or rooted cuttings. In these situations, the integrated regulator allows you to reduce light emission to adapt it to stages with lower lighting needs.

The recommended coverage of 150 x 150 cm allows the panel to be installed in large grow tents and conditioned rooms. However, the effective surface will depend on the mounting height, plant distribution, and the amount of light each crop requires.

The 600 W LED for indoor growing is also interesting for those looking to replace certain traditional lighting systems with LED technology, with the possibility of adjusting the power used during the plant cycle.

How is Fission LED 600W V2.0 used?

The installation of the 600W LED Grow Light should be carried out on a stable structure, using suitable suspension elements for a luminaire of approximately 7.1 kg. Before connecting the unit, it is important to check the compatibility of the electrical installation and follow the manufacturer's mounting recommendations.

Once the panel is placed over the growing surface, the intensity can be selected using the integrated regulator. The possibility of working at 40%, 60%, 80%, or 100% allows you to adapt the operation to different situations without having to change the lighting system.

To take advantage of the features of the 600W LED Grow Lamp, it is advisable to consider the following recommendations:

• Seedlings and cuttings: start with reduced intensities and regularly observe the response of the plants.
• Vegetative growth: progressively increase the power when lighting needs are greater.
• Flowering: adjust the intensity according to the light needs of each species and the available surface.
• Installation height: follow the manufacturer's instructions and check the light distribution over the plants.
• Photoperiod: use a compatible timer to schedule lighting and darkness periods.
• Ventilation: