Fission LED 480W V2.0

Buy Online Fission LED 480W V2.0

The choice of suitable lighting equipment allows you to organize indoor growing installations with greater control over the amount of light the plants receive.

The Fission LED 480W V2.0 from Pure Factory is designed for those who need to illuminate medium-sized surfaces and are looking for a luminaire with adjustable power, balanced light distribution, and a spectrum suitable for different stages of plant development.

This evolution of the Fission Board series incorporates SANAN LED diodes distributed over a Quantum Board structure, providing a light emission aimed at maximizing the use of the available surface.

With a photosynthetic efficacy of 2.43 µmol/J and a photosynthetic photon flux of 1,166 µmol/s, it is an alternative for installations that require constant and adaptable lighting.

The integrated dimmer allows you to select four intensity levels, while the 600 x 600 mm format makes it easy to place in grow tents and rooms adapted for indoor plant development.

What is Fission LED 480W V2.0?

The Fission LED 480W V2.0 is a horticultural luminaire from Pure Factory designed to provide artificial lighting using LED technology. It belongs to the Fission V2.0 range, characterized by incorporating a mixed spectrum and a diode distribution aimed at achieving homogeneous light coverage.

The Fission 480W LED Panel is equipped with SANAN diodes of different color temperatures and wavelengths. The combination of warm and cool white lighting, along with emitters from certain regions of the red, ultraviolet, and far-red spectrum, provides a light source intended for different cultivation phases.

The Fission V2.0 LED Luminaire incorporates an intensity regulator with four positions: 40%, 60%, 80%, and 100%. This feature makes it easy to adapt the power to the lighting needs of each stage, without having to keep the equipment at maximum intensity at all times.

Among the main technical features of the Fission LED 480W V2.0 are:

• Manufacturer: Pure Factory.
• Model: Fission LED 480W V2.0.
• Nominal power: 480 W.
• Recommended surface: approximately 120 x 120 cm.
• Photosynthetic efficacy: 2.43 µmol/J.
• Photosynthetic photon flux (PPF): 1,166 µmol/s.
• Intensity adjustment: 40%, 60%, 80%, and 100%.
• Nominal input voltage: 220-240 V / 50-60 Hz.
• Input voltage range: 175-264 V.
• Power factor: greater than 0.95.
• LED source: SANAN.
• 3000 K diodes: 616 units.
• 5000 K diodes: 300 units.
• 660 nm diodes: 136 units.
• 395 nm diodes: 8 units.
• 730 nm diodes: 8 units.
• Approximate dimensions: 600 x 600 x 80 mm.
• Weight: 6.1 kg.

These specifications allow the equipment to be used as an LED lighting system for indoor cultivation in installations where it is desirable to combine a power of 480 W with the possibility of adjusting the light supply according to the cultivation conditions.

What is Fission LED 480W V2.0 for?

The Fission LED 480W is used to provide the light radiation necessary for photosynthesis in plants grown indoors. The combination of different wavelengths allows the same luminaire to be used during different phases of the plant cycle.

During vegetative growth, the lighting contributes to the development of leaves, stems, and new structures. The ability to adjust the power makes it easier to adapt the amount of light to the size of the plants and environmental conditions.

In the flowering phase, the available power and mixed spectrum make it possible to provide lighting to species with greater light requirements. To achieve proper distribution, it is important to consider the distance of the panel, plant density, and the effective cultivation area.

This LED lighting for indoor cultivation can also be used to maintain mother plants, support the growth of seedlings, and provide lighting to rooted cuttings. In these stages, it is especially useful to have a regulator that allows you to reduce the intensity.

With a recommended coverage of 120 x 120 cm, the panel is aimed at medium-sized installations. The actual usable surface will depend on the needs of each species and the distribution of light over the cultivated area.

The 480 W LED for indoor cultivation is also an option for those who want to replace certain traditional lighting systems with LED technology, maintaining more flexible control over the power used.

How is Fission LED 480W V2.0 used?

The installation of the 480W LED spotlight for cultivation begins by placing the luminaire on a sturdy structure and using suitable suspension elements for a weight of approximately 6.1 kg. Before connecting the equipment, it is necessary to check that there is enough space for ventilation and that the electrical installation meets the manufacturer's recommendations.

Once the panel is placed over the growing area, the power level is selected using the integrated regulator. The intensity and height should be adjusted taking into account the stage of plant development, the illuminated surface, and environmental conditions.

To properly take advantage of the features of the 480W LED grow lamp, it is advisable to follow these recommendations:

• Seedlings and cuttings: initially use reduced lighting levels and regularly check the plant response.
• Vegetative growth: gradually increase the intensity when plant development requires more light.
• Flowering: adjust the power and distance to maintain proper light distribution.
• Photoperiod: use a compatible timer to schedule lighting and darkness hours.
• Ventilation: maintain adequate air circulation around the panel and within the installation.
• Light control: use a PAR meter when possible to check PPFD values at plant height.
• Maintenance: periodically clean accumulated dust and check the connections with the equipment unplugged.

The integrated regulator also allows you to manage power consumption. At maximum intensity, the Fission LED 480W V2.0 has a nominal consumption of 0.48 kWh for each hour of operation.

As a reference, operating for 12 hours a day at nominal power, the theoretical consumption would be approximately 5.76 kWh per day, not including fans, extractors, controllers,