PURIZE Carbon 150 g

150 g bag of Purize® activated carbon for refilling filters

At Hydroponics Blanes this format is recommended when you are looking for a convenient replacement for maintenance work: it allows you to dose the contents according to the volume of the filter and keep the rest well sealed for future refills.

What is activated carbon and why is it used in filters?

Adsorption filtration

Activated carbon stands out for its porous structure, which helps retain compounds present in the air as it passes through the filter bed. That is why it is commonly used in filtration systems, especially when the goal is to improve air quality in enclosed spaces.

Advantages of using a refill instead of a full replacement

By refilling a compatible filter, you make use of the reusable body and only change the filtering material. This makes maintenance easier and allows you to adjust the amount of carbon according to the size of the filter.

What is this 150 g Purize® bag for?

Refilling reusable filters

This format is intended to refill filters designed to allow carbon replacement. It is useful when the previous carbon has lost effectiveness and you want to restore the filter's performance.

Flexible dosing

The 150 g bag allows for partial or complete refills, depending on the filter design. If the filter is small, you can refill and save the leftover for the next replacement.

Compatibility and recommended use

Check the type of filter before refilling

This activated carbon is intended for refillable filters. Before using it, it is advisable to check that the model allows opening and refilling, and that the grain/particle size is suitable for the internal system (meshes, sponges, discs, or compartments).

When to change the carbon

If you notice a loss of filter effectiveness or the carbon has been in use for a long time, it is usually time to renew it. The duration depends on the air flow, humidity, use, and maintenance of the filter.

How to refill a filter with Purize® activated carbon

Step by step (basic maintenance)

• Completely empty the old carbon from the filter.
• Clean the inside of the filter (without wetting components that should not get wet) and check meshes or retainers.
• Refill with Purize® activated carbon without overpacking, so as not to hinder air flow.
• Close the filter and check that it is well sealed.

Practical tip

For a more stable result, keep the carbon in a dry place and close the bag immediately after each use, preventing it from absorbing ambient moisture.

Storage and preservation

Keep the carbon dry

Store the bag in a cool and dry place. Moisture can reduce the adsorption capacity and therefore the performance of the carbon when used in the filter.

Proper closure after each refill

If you do not use all the contents, close the bag tightly to keep the carbon in good condition until the next replacement.

Frequently asked questions

Can it be used for any filter?

It is recommended only for filters that allow refilling. In sealed or non-removable filters, it is usual to replace the entire filter.

How much do I need for my filter?

It depends on the volume of the filter's carbon compartment. The 150 g bag is useful for small or partial refills and for periodic maintenance.

Buy Purize® activated carbon at Hydroponics Blanes

Buy the 150 g bag of Purize® activated carbon to refill filters and keep your filtration system up to date with a simple refill. At Hydroponics Blanes your order is prepared with care and with discreet shipping.