Can-Lite Filter 3500 m3/h (1 m, Flange 315) Can-Fan

Can-Lite 3500 m3 Activated Carbon Filter (1 m mouth 315)

The Can-Lite 3500 m3 Filter (1 m mouth 315) is designed for demanding projects that require powerful extraction and constant odor control. It integrates virgin Australian activated carbon (type CKV-4) with a high specific surface area capable of adsorbing volatile organic compounds, offering odor attenuation close to 99%.

The galvanized steel housing provides rigidity and strength, while the lightweight connector facilitates airtight couplings in Ø315 mm duct lines.

Highlighted specifications: optimal flow rate 3500 m³/h, maximum flow rate 3850 m³/h, length 1000 mm, diameter Ø450 mm, weight 33.5 kg approx., carbon weight 16.3 kg with thickness 5 cm. The microperforated cylinder reduces pressure loss and evenly distributes the airflow through the filter bed.

Includes pre-filter sleeve to retain dust and lint, extending a typical durability of 9–12 months depending on hours of use, humidity, and particle saturation.

Proven compatibility with high-performance extractors (e.g., ISO-Max 315/3300, Max-Fan 315/3510) within the cannabis cultivation accessories ecosystem.

Indoor Cultivation Can-Lite 3500 m3 Filter (1 m mouth 315)

In professional indoor cultivation facilities, keeping the exhaust air free of aromas is as strategic as air renewal and thermal management. The Can-Lite 3500 m3 Filter (1 m mouth 315) performs at its best in large-volume rooms and XL indoor grow tents, where the high flow rate requires stable and efficient filtration.

What is the Can-Lite 3500 m3 Filter (1 m mouth 315) for?

Its purpose is to neutralize odors before expelling the air outside. The passage of the flow through the virgin Australian activated carbon bed captures aromatic molecules and fine aerosols, providing discreet ventilation in homes, shops, and warehouses, even with high extraction flow rates.

Indoor cultivation accessory Can-Lite 3500 m3 Filter (1 m mouth 315)

It functions as the core of the ventilation system together with centrifugal or mixed extractors, Ø315 mm ducts, clamps, reducers, and silencers. The microperforated architecture optimizes the distribution of the flow throughout the carbon bed, increasing overall efficiency and facilitating integration into new or already operational lines.

When to use the Can-Lite 3500 m3 Filter (1 m mouth 315)?

Recommended throughout the entire cultivation cycle to ensure permanent discretion. It provides critical value in pre-flowering and flowering, phases with higher aromatic emission. It is also useful during pruning, transplanting, and biomass handling, times when the odor can intensify significantly.

Instructions for use Can-Lite 3500 m3 Filter (1 m mouth 315)

Install at the beginning of the extraction circuit in line with an extractor compatible with 3500 m³/h, using Ø315 mm flexible duct and airtight clamps. Correctly orient the direction of the flow so that the air passes through the outer mesh and makes uniform contact with the carbon. Keep the pre-filter sleeve clean; wash or replace when visible saturation exists. Check joints to avoid leaks. Replace the filter when odor attenuation decreases after 9–12 months of typical use or sooner if conditions are very dusty.

Advantages of using Can-Lite 3500 m3 Filter (1 m mouth 315)

• High adsorption capacity with virgin Australian activated carbon (CKV-4).
• Optimal flow rate 3500 m³/h and maximum 3850 m³/h for demanding rooms.
• Ø315 mm mouth compatible with standard ducts and extractors.
• Microperforated body that preserves flow and reduces pressure loss.
• Pre-filter sleeve included and durability 9–12 months, depending on use.

Where to buy a Can-Lite 3500 m3 Filter (1 m mouth 315) online?

Available at Hydroponics Blanes, a benchmark as a Grow Shop in Spain and trusted Grow Shop. Wide range of ventilation for indoor cultivation, cannabis cultivation accessories and indoor grow tents, with specialized technical advice and discreet shipping throughout the national territory.

The Can-Lite 3500 m3 Filter (1 m mouth 315) brings together performance, discretion and robustness for modern high-flow projects. With length 1000 mm, diameter Ø450 mm, weight 33.5 kg and carbon bed 16.3 kg (thickness 5 cm), it enhances clean extraction in technical rooms and XL tents. Available at Hydroponics Blanes with expert support to select a compatible extractor and design efficient duct routes, as well as discreet shipping that simplifies logistics from anywhere.