Can-Lite Filter 3500 m3/h (1 m, Flange 250) Can-Fan

Can-Lite Filter 3500 m3 (1 m 250 mm flange) for indoor crops

The Can-Lite Filter 3500 m3 (1 m 250 mm flange) combines professional performance and ease of integration into demanding ventilation systems. It incorporates virgin Australian activated carbon, an adsorbent with a high specific surface area that captures volatile organic compounds responsible for odor.

The model's specifications guarantee compatibility with large-volume installations: Model 3500, optimal flow 3500 m³/h, maximum flow 3850 m³/h, flange Ø250 mm, diameter Ø450 mm, length 1000 mm, weight 35.5 kg.

The stainless steel body provides rigidity and durability, while the plastic connector end helps reduce weight to simplify assembly.

The microperforated surface minimizes pressure loss, preserving airflow even with long runs and several accessories in line.

Includes pre-filter sleeve to retain dust and lint, extending durability 9–12 months under normal use conditions.

Designed to operate with extractors and turbines of 3500 m³/h, it fits into professional environments with high plant density, powerful lighting, and continuous air renewal needs within the cannabis cultivation accessories catalog.

Indoor Cultivation Can-Lite Filter 3500 m3 (1 m 250 mm flange)

In advanced indoor cultivation projects, odor control is as important as temperature or humidity. The Can-Lite Filter 3500 m3 (1 m 250 mm flange) is sized for XL tents and technical rooms, maintaining clean and discreet extraction without choking the airflow required by high-power equipment.

What is the Can-Lite Filter 3500 m3 (1 m 250 mm flange) for?

The purpose is to neutralize odors before expelling air outside. As it passes through the bed of virgin Australian activated carbon, aromatic molecules are retained, achieving discreet ventilation in homes, shops, and warehouses. This performance is key when the installation works with high flows and requires maximum efficiency.

Indoor cultivation accessory Can-Lite Filter 3500 m3 (1 m 250 mm flange)

It works as the core of the ventilation system together with centrifugal or mixed extractors, Ø250 mm ducts, clamps, reducers, silencers, and wide elbows. The microperforated cylinder improves the distribution of the flow throughout the carbon bed, increasing overall efficiency in indoor grow tents and rooms with several extraction lines.

When to use the Can-Lite Filter 3500 m3 (1 m 250 mm flange)?

Recommended throughout the entire cultivation cycle, with special relevance in pre-flowering and flowering, stages with higher aromatic emission. It also adds value during pruning, transplants, or biomass handling, moments when the odor can intensify. Keeping the filter active from the start favors a stable and discreet environment.

How to use Can-Lite Filter 3500 m3 (1 m 250 mm flange)

Install in line with a 3500 m³/h extractor using Ø250 mm flexible duct and clamps that ensure tightness. Respect the direction of flow indicated on the flange: air must pass through the outer mesh to evenly use the carbon bed. Check the pre-filter sleeve periodically; clean or replace when visible saturation appears. Check joints and seals to avoid leaks. Replace when odor attenuation decreases after 9–12 months of typical service or sooner in very dusty environments.

Advantages of using Can-Lite Filter 3500 m3 (1 m 250 mm flange)

• High adsorption capacity with virgin Australian activated carbon.
• Optimal flow 3500 m³/h and maximum 3850 m³/h for demanding rooms.
• Ø250 mm flange compatible with standard extractors and ducts.
• Microperforated body that preserves flow and reduces losses.
• Durability 9–12 months with included pre-filter sleeve.

Where to buy a Can-Lite Filter 3500 m3 (1 m 250 mm flange) online?

Available at Hydroponics Blanes, a benchmark as a Grow Shop in Spain and trusted Grow Shop. Expert catalog in ventilation for indoor cultivation, cannabis cultivation accessories and indoor grow tents, with technical advice and discreet shipping throughout the territory.

The Can-Lite Filter 3500 m3 (1 m 250 mm flange) provides a balanced combination of performance, discretion and robustness in modern installations. With length 1000 mm, diameter Ø450 mm, weight 35.5 kg and tolerance up to 3850 m³/h, it integrates seamlessly into Ø250 mm lines, offering clean and controlled extraction air. Available at Hydroponics Blanes, with support to choose a compatible extractor and efficient duct design, as well as discreet shipping that facilitates logistics anywhere in the country.