Bluelab Guardian Wi-Fi Monitor

Bluelab Guardian WI-FI Monitor for EC, temperature and Ph

The Bluelab Guardian WI-FI Monitor brings together in a wall panel the continuous reading of the three pillars of irrigation: pH (0.0–14.0), conductivity (EC/CF scales, TDS ppm500 and ppm700) and temperature (°C/°F). The large adjustable-brightness green LED display prevents light interference in rooms and grow tents, and allows you to confirm at a glance if the reservoir remains in range.

The module integrates Wi-Fi (can be disabled) to connect with Bluelab's Edenic ecosystem: instant notifications to your phone, historical reports, and remote adjustment of alarm limits.

The device operates on mains power, retains settings during power outages, and works in continuous reading 24 hours a day.

Includes replaceable pH probe with BNC, conductivity probe and temperature probe with 2 m cables to comfortably reach reservoirs.

Calibration is simple for pH (two points, pH 7 and pH 4/10), while EC and temperature do not require calibration; it also applies automatic temperature compensation when pH and EC measure the same solution.

With wide ranges (up to 5.0 EC, 50 CF, 2500 TDS and 3500 ppm) and fine resolution (0.1 pH / 0.1 EC / 1 °C), the monitor helps stabilize recipes, reduce salt blockages and anticipate deviations.

Within meters for cultivation and indoor accessories, it stands out for reliability, ease of reading and connectivity, key for standardizing processes in indoor cultivation facilities aimed at cannabis cultivation.

Available at Hydroponics Blanes, online grow shop and Grow Shop in Spain with discreet shipping and technical advice from a trusted Grow Shop.

Indoor cultivation Bluelab Guardian WI-FI Monitor

In indoor cultivation nutritional stability determines yield. Bluelab Guardian WI-FI Monitor shows in real time the target pH for good assimilation, the appropriate EC for each phase (growth, transition and flowering) and the water temperature, a variable that conditions root oxygenation. Visual and mobile alarms warn of drifts due to evaporation, over-fertilization or cooling/heating of the reservoir, allowing action before symptoms appear on leaves.

What is the Bluelab Guardian WI-FI Monitor for?

It is used to continuously monitor the critical parameters of the reservoir, receive alerts when values go out of range, record history and optimize fertilization decisions. With EC/CF or PPM, the actual concentration is adjusted; with pH, acidity is corrected with regulators; with temperature, the optimal window for active roots is evaluated. In cannabis plants this translates into uniformity between irrigations and more consistent harvests.

Tool for indoor cultivation Bluelab Guardian WI-FI Monitor

As a daily tool, it provides wall mounting, 2 m probes, non-volatile memory and green LEDs safe for indoor cultivation. The replaceable BNC pH probe simplifies maintenance, while reading in different units (EC/CF/ppm) makes it easy to adapt manufacturer tables. Wi-Fi access allows you to check status from anywhere and conveniently adjust alarm limits.

How is the Bluelab Guardian WI-FI Monitor used?

1) Installation: mount the monitor on the wall, away from direct splashes; guide cables and place probes in the reservoir, avoiding intense bubbling for stable readings.
2) Configuration: select conductivity and temperature units; set alarm limits for pH, EC and °C; adjust screen brightness.
3) Wi-Fi connection: pair with the Edenic app and activate mobile alerts for out-of-range values and historical tracking.
4) Calibration: perform two-point calibration for pH (7.0 and 4.0/10.0). EC and temperature do not require calibration.
5) 24/7 operation: leave the monitor in continuous reading; in case of alarm, correct the recipe: dilute or reinforce nutrients, adjust with pH regulators or stabilize temperature.
6) Maintenance: rinse probes with clean water, check cables periodically and replace the pH electrode if stabilization time increases or calibration requires large corrections.

Bluelab Guardian WI-FI Monitor Price

The price reflects a professional monitor with Wi-Fi, configurable alarms, LED display, memory, thermal compensation and included probes. Check promotions and packs with buffer solutions and accessories at Hydroponics Blanes, a benchmark Grow Shop in Spain in meters for cultivation and indoor accessories.

Where to buy Bluelab Guardian WI-FI Monitor online?

Available at Hydroponics Blanes, trusted Grow Shop and online grow shop with discreet shipping. Technical team ready to integrate the monitor into indoor cultivation facilities, define ranges by stage and design probe inspection and cleaning protocols.

For projects that require total control, the Bluelab Guardian WI-FI Monitor offers permanent monitoring, mobile alerts and comparable data that speed up fine adjustments.

A robust solution to standardize recipes in indoor cannabis cultivation, backed by the experience of Hydroponics Blanes and the logistics of a trusted Grow Shop with nationwide coverage.