2 m Trip Male Cable with Molded Plug

2 m Cable Trip Male Injected Plug

The 2 m Cable Trip Male Injected Plug is designed for those looking for a clean, reliable electrical run with no cuts or splices. The injected plug guarantees firm and long-lasting contact, preventing looseness that can cause overheating or voltage drops.

The construction with copper conductors and flexible PVC sheath withstands intensive use in cabinets and rooms, allowing comfortable routing along perimeters or technical trays.

The trip male connector makes direct connection to the reflector from the compatible ballast easy, common in HPS/LEC/CMH setups and in setups with LED grow lights that require auxiliary power.

The recommended cross-section of 3×1.5 mm² (equivalent to the most widespread indoor standard) allows working with power up to 1000 W over short runs, keeping voltage drop contained and start-up stable. The matte black finish helps integrate the cabling into the environment, reducing unwanted reflections.

In operational terms, two meters in length are enough to run from the ballast located outside the tent or in a high ventilated area to the reflector, improving the room’s thermal management.

The choice of a quick-connect cable simplifies setups, reduces failure points, and speeds up replacements during maintenance.

In addition, the design is aligned with good safety practices: presence of grounding, uniform insulation, and connectors that withstand repeated disconnections without losing firmness.

For professional layouts, it works wonderfully alongside indoor electrical accessories such as certified power strips, breakers/RCDs, and trunking that organize the wiring.

Result: fewer flickers, consistent starts, and precise photoperiods in cannabis cultivation with high-density cannabis plants.

Indoor grow 2 m Cable Trip Male Injected Plug

In indoor cultivation, a specific cable with trip male avoids handling the ballast terminals and reduces installation time. Two meters allow you to take the ballast out of the tent to lower the canopy temperature, or to run the line to the reflector while keeping service aisles clear. With perimeter routing and cable ties, airflow stays free around filters and extractors.

What is the 2 m Cable Trip Male Injected Plug for?

It is used to make the direct ballast–reflector connection without cutting cables, supporting up to 1000 W. It is also useful for quick-connect CFL reflectors or as a dedicated patch lead in lines with LED grow lights that include an external driver. The injected plug adds mechanical and electrical stability in continuous use.

Indoor cultivation tool 2 m Cable Trip Male Injected Plug

• Length: 2 m for clean runs between ballast and reflector.
• Connector: trip male with quick-connect injected plug.
• Admissible power: up to 1000 W in typical indoor installations.
• Materials: copper conductors, flexible and resistant PVC sheath.
• Recommended cross-section: 3×1.5 mm² (phase, neutral, and ground) for horticultural use.
• Application: HPS, LEC/CMH, CFL and systems with LED grow lights.
• Extra: perfect complement within certified indoor electrical accessories.

How is the 2 m Cable Trip Male Injected Plug used?

1. Disconnect the main power and verify absence of voltage on the line.
2. Connect the trip male end to the compatible reflector, ensuring it is secured until the safety click.
3. Secure the run with cable ties along the perimeter; leave a “drip loop” before the reflector so any possible condensation does not reach the connectors.
4. Connect the other end to the dedicated port on the ballast (output to reflector) following the manufacturer’s markings.
5. Switch on and check that there are no sparks, strange noises, or abnormal heating. Label with the date for preventive maintenance.
6. Check each cycle: connector tightness, PVC condition, and cleanliness from accumulated dust.

Price 2 m Cable Trip Male Injected Plug

Product with an excellent price-utility ratio: a small investment that provides safety, order, and quick assembly in lighting systems for indoor cultivation. Ideal for standardizing spares and minimizing downtime.

Where to buy 2 m Cable Trip Male Injected Plug online?

Available at Hydroponics Blanes, your trusted Grow Shop and Grow Shop in Spain, with discreet shipping in 24/48 h. Complete catalogue of indoor electrical accessories, ballasts, reflectors, timers and LED grow lights to complete any installation with technical advice.

For those looking for a tidy and reliable room, the 2 m Cable Trip Male Injected Plug solves the ballast–reflector connection with a robust format, durable injected plug and 1000 W capacity. A direct ally for cannabis cultivation projects with demanding cannabis plants.

At Hydroponics Blanes you will find an expert team, custom packs and discreet shipping throughout the country to equip everything from cabling to LED grow lights and the rest of the key components of the indoor ecosystem.