2 m Cable with Molded Plug (3 x 1.5 KWD)

2 m Cable. Injected Plug (3 X 1.5 KWD)

The 2 m Cable. Injected Plug (3 X 1.5 KWD) was created to meet real needs in cabinets and cannabis grow rooms. The injected plug provides a firm and stable contact, avoiding the typical looseness of hand-assembled connectors and reducing heating at sockets.

The assembly incorporates live, neutral and earth, with coated copper conductors that offer low resistance and excellent electrical transfer.

The three-core cross-section equivalent to 3 × 1.5 mm² (KWD format indicated by the manufacturer) allows working up to 1000 W over short runs and keeps voltage drops contained when powering ballasts, extractors, special CFL reflectors or power supplies for LED grow lights.

The 2 meter length makes it easy to route neatly around the perimeter of the tent, without coils that obstruct airflow. The PVC jacket adds resistance to abrasion and ambient humidity, while the stripped and bared terminals at the free end simplify connection to terminal blocks, junction boxes or the equipment’s terminal strips.

In professional setups, standardization is appreciated: the same cable for magnetic or electronic ballasts, inline extractors, controllers and CFL systems; fewer points of failure, more consistency over long cycles.

The design integrates with appropriate protections (MCB and RCD), certified terminal blocks and trunking or cable ties to guide the electrical run away from damp areas.

The result is an orderly room, with less interference in timers and controllers, stable lighting and reliable startups crop after crop.

For those managing compact tents, this length avoids annoying excess cable; for rooms, two meters provide leeway to raise ballasts to ventilated areas or bring them closer to distribution boards, helping to draw heat away from the canopy.

In operations with demanding cannabis plants, every detail counts: fewer flickers, fewer micro-outages and a precise photoperiod translate into uniformity in growth and flowering.

Indoor growing 2 m Cable. Injected Plug (3 X 1.5 KWD)

In indoor growing, wiring defines safety and continuity. This 2 meter model organizes the connection between outlet and equipment, ideal for 60–120 cm tents and rooms with service aisles. Used together with cable ties and trunking, it keeps airflow clear, which is key for reflectors, filters and climate equipment.

What is the 2 m Cable. Injected Plug (3 X 1.5 KWD) used for?

It is used to reliably power HPS/LEC/CMH ballasts, extractors, CFL reflectors or LED grow lights power supplies up to 1000 W, maintaining a stable connection thanks to the injected plug. It is also useful for pumps and controllers within the rated range.

Indoor growing tool 2 m Cable. Injected Plug (3 X 1.5 KWD)

• Length: 2 meters for short, tidy runs.
• Construction: PVC injected plug; coated copper conductors.
• Cross-section: 3 × 1.5 (live, neutral and earth) with stripped and bared ends.
• Power rating: up to 1000 W in typical indoor installations.
• Compatibility: magnetic and electronic ballasts, extractors and CFL reflectors.
• Recommended use: integration into indoor electrical accessories with appropriate protections.

How is the 2 m Cable. Injected Plug (3 X 1.5 KWD) used?

1. Disconnect the main power supply and verify there is no voltage.
2. Connect the stripped end to the equipment according to the diagram: live (brown/black), neutral (blue) and earth (green-yellow).
3. Route around the perimeter with cable ties; leave a drop-shaped “loop” before equipment so condensation does not reach the terminals.
4. Insert the injected plug into a certified outlet; avoid low-quality power strips or unprotected multi-plugs.
5. Switch on and check for absence of sparking and overheating; label with installation date for preventive control.
6. Inspect each cycle: tightness of screws, condition of PVC and dust cleanliness.

Price 2 m Cable. Injected Plug (3 X 1.5 KWD)

Product with an excellent price-utility ratio. A small investment that increases electrical safety, order and operational continuity in lighting systems for indoor growing.

Where to buy 2 m Cable. Injected Plug (3 X 1.5 KWD) online?

Available at Hydroponics Blanes, your trusted Grow Shop and Grow Shop in Spain, with discreet shipping in 24/48 h. Complete catalogue of indoor electrical accessories, power strips, timers, ballasts, reflectors and LED grow lights to complete any installation.

For those who value order and safety, the 2 m Cable. Injected Plug (3 X 1.5 KWD) provides the connection between outlet and equipment with a robust format, durable injected plug and three-core cross-section prepared for 1000 W.

At Hydroponics Blanes you will find technical advice, custom packs and discreet shipping to equip cannabis grow projects with cannabis plants, integrating everything from wiring and protection to next-generation LED grow lights.