1.5 m Male Trip Cable with Molded Plug

1.5 m Cable. Male Trip Molded Plug

This 1.5 m Cable. Male Trip Molded Plug is designed for horticultural lighting installations that require daily reliability. The molded plug prevents looseness and false contacts that are common with hand-assembled connectors, increasing safety and the service life of the assembly.

The PVC sheath provides protection against abrasion and ambient humidity, while the brass/copper conductors optimize electrical transfer with low resistance.

The 3×1.5 mm² cross section supports typical currents of 250–600 W equipment and helps keep voltage drop contained over short runs; nominal rating up to 10 A and 250 V for domestic and semi-professional use.

The 1.5 m length minimizes excess cable, clears service aisles and facilitates tidy routing along walls or trays.

Direct connectivity to magnetic ballasts or electronic ballasts (check polarity and local regulations), providing a clean transition from the plug to the ignition equipment.

In grow tents with LED grow lights, HPS or LEC/CMH, this cable is the practical solution to standardize connections and reduce failure points.

The molded PVC plug with copper blades offers firm contact, a detail that results in less heating and greater system efficiency.

For a professional environment, it is advisable to combine it with certified power strips, residual current protection and circuit breakers in line with the load.

When planning the layout, the 1.5 m length provides leeway to raise the ballast to higher areas or move it outside the tent, reducing heat in the canopy.

The flexible jacket allows bends without memory, ideal for corners, and the non-slip relief of the plug makes insertion and removal easier with gloved hands.

In cannabis growing with demanding cannabis plants, electrical stability is reflected in fewer flickers, consistent starts and precise photoperiod cycles; every detail counts when the goal is batch-to-batch uniformity.

Indoor growing 1.5 m Cable. Male Trip Molded Plug

In indoor growing, a reliable cable is part of the room’s “life support system”. The 1.5 m length helps tidy up the wiring between ballast and outlet, avoiding unnecessary coils that raise temperature. Clean routing reduces interference with fans, timers and controllers.

What is the 1.5 m Cable. Male Trip Molded Plug used for?

It is used to connect lighting equipment (HPS, LEC/CMH or LED grow lights) to the mains in a safe and durable way, maintaining 10 A and 250 V standards. It is also useful for pumps, extractors or controllers, as long as the load remains within the electrical range.

Indoor growing tool 1.5 m Cable. Male Trip Molded Plug

• Length: 1.5 m for short, tidy runs.
• Cross section: 3×1.5 mm² (live, neutral and earth).
• Materials: PVC in sheath and plug; contacts in brass/copper.
• Rating: 10 A | 250 V | 50–60 Hz.
• Compatibility: magnetic ballasts and cultivation electronic ones.
• Application: tents and rooms with HPS/LEC/LED grow lights.
• Key advantage: molded plug that increases stability and durability.

How to use the 1.5 m Cable. Male Trip Molded Plug?

1. Cut general power and verify the absence of voltage on the line.
2. Connect the free end to the ballast according to the manufacturer’s diagram (live, neutral and earth clearly identified).
3. Route it around the perimeter of the tent with cable ties, leaving a “drip loop” before equipment to prevent moisture from reaching connectors.
4. Insert the molded plug into a certified outlet; avoid low-quality multi-plug adapters.
5. Switch on, check for absence of sparking, overheating and attach a tag with the installation date for preventive control.
6. Inspect every crop cycle: terminal tightness, PVC condition and dust cleanliness.

Price of 1.5 m Cable. Male Trip Molded Plug

Product with an excellent price-utility ratio: low investment that increases electrical safety and reduces downtime due to connection failures. Ideal for standardizing installations without blowing up budgets.

Where to buy 1.5 m Cable. Male Trip Molded Plug online?

Available at Hydroponics Blanes, your trusted Grow Shop and Grow Shop in Spain with discreet shipping within 24/48 h. Wide catalog of cables, power strips, timers, ballasts, reflectors and LED grow lights, with advice to choose the ideal solution.

Anyone seeking order and safety in the grow room will find in the 1.5 m Cable. Male Trip Molded Plug a direct ally: short run, durable molded plug and 3×1.5 mm² with headroom for usual loads.

At Hydroponics Blanes there is specialized technical support and discreet shipping throughout the peninsula to equip indoor growing of demanding cannabis growing with cannabis plants, integrating everything from cables and protectors to state-of-the-art LED grow lights. A simple piece that organizes, protects and helps maintain stable cycles harvest after harvest.