1/4" Automatic Elbow

Buy 1/4" Automatic Elbow

This 1/4" automatic elbow solves direction changes without flow loss or constrictions, key in drip irrigation system, foggers, or manual lances.

The 90° geometry maintains the optimal bend radius so the line doesn't kink, while the quick connection mechanism avoids tools and reduces assembly times.

Made of durable polyethylene, it incorporates anti-UV treatment and anti-mold additives that protect against light, humidity, and biofilm, common in grow rooms.

Compatible with standard 1/4" tubing, it allows precise perimeter routes between pots, bypasses near trays, and branches to pressure-compensating drippers. The white color makes it easy to locate the piece in dark areas and reflects radiation to minimize water heating.

Overall, it provides watertightness, modularity, and order in hydraulic wiring, something essential to water indoor crops uniformly and replicate irrigation recipes between cycles.

Indoor Growing 1/4" Automatic Elbow

In tents, rooms, and shelves, the density of pots requires controlled turns so each line reaches the exact point. With the 1/4" Automatic Elbow you create clean angles behind tanks, filters, and distributors, avoiding twists that alter flow and result in uneven watering. The push-in design speeds up expansions: adding a new row or moving a pot just means pressing, cutting to size, and done. Fewer leaks, less hose mess, and a layout that makes cleaning and maintenance easier.

What is the 1/4" Automatic Elbow for?

It is used to join two sections of 1/4" tubing at a 90° angle, optimizing the hydraulic path and water distribution. Main benefits:

• Precise flow direction to drippers, micro-sprinklers, or valves.
• Reduction of losses from pinching by avoiding tight bends.
• Modularity in room expansions without specific tools.
• Order and traceability of the layout to diagnose pressure drops or leaks.

Accessories for indoor irrigation 1/4" Automatic Elbow

It integrates with common irrigation accessories: distributors, tees, end caps, 1/4" shut-off valves, in-line filters, quick connectors to tank, and 2–8 L/h pressure-compensating drippers. In mixed layouts, it combines with a 1/2"–1/4" reducer from the pump or manifold. The polyethylene material with anti-UV treatment and anti-mold additive provides stability against light and humidity cycles typical of indoor growing.

How is the 1/4" Automatic Elbow used?

1. Cut the 1/4" hose straight and without burrs to ensure watertightness.
2. Insert the end up to the stop of the automatic elbow by pressure; the retaining ring holds the line.
3. Repeat on the other side and check that the 90° angle resolves the turn without tension.
4. Do a pressure test from the irrigation system; if necessary, remove by pressing the release ring and reinsert.
5. Secure the route with clips or clamps to keep order and make it easier to water indoor crops repeatedly.

Price 1/4" Automatic Elbow

The cost of the 1/4" Automatic Elbow is minimal compared to the benefit in uniformity and installation time. Check packs and active discounts at Hydroponics Blanes, trusted Grow Shop with a wide range of irrigation accessories.

Where to buy 1/4" Automatic Elbow online?

Available at Hydroponics Blanes, online grow shop specialized in indoor growing, with discreet shipping and support to size lines, choose drippers, and plan room expansions.

For those seeking precise turns and clean layouts, the 1/4" Automatic Elbow in white polyethylene with anti-UV treatment and anti-mold additive allows compact routes, quick assemblies, and uniform delivery at each dripper. A small piece that makes a difference in the stability of the irrigation system and in efficiency when watering indoor crops consistently cycle after cycle.

Quick specs: Material polyethylene | Size 1/4" | Angle 90° | Anti-UV treatment | Anti-mold additive | Color white | Compatible with 6.35 mm tubing and push-in.