Acrylic Desiccator 200 mm

Methacrylate Desiccator 200 mm. for extracting BHO impurities

This methacrylate desiccator combines strength and tightness to help remove residual gases and moisture in a controlled manner. The chamber operates up to -740 mm/Hg with a loss of less than 20 mm/Hg in 24 hours, which promotes a stable vacuum environment.

The top is made of transparent polycarbonate, the base of polypropylene, and the gasket is neoprene fitted in a groove to ensure a tight seal.

The 200 mm format allows you to place a tray or inner rack to raise the material above the bottom.

This equipment does not include a pump or hoses, so it can be connected to most systems using a compatible connection set.

At Hydroponics Blanes —Trusted Grow Shop and Grow Shop in Spain— there is a wide range of BHO Accessories and BHO tools that complement this desiccator: hoses, valves, silicone jars, dabbers, and meters.

Accessories for Methacrylate Desiccator 200 mm. Extractions

Among the BHO Accessories, a desiccator facilitates more homogeneous purges by maintaining constant negative pressure. The transparent polycarbonate body allows you to observe the state of the material without opening the chamber. The neoprene gasket and lid adjustment help maintain vacuum, while the polypropylene base provides stability. As part of BHO Extraction Kits, this desiccator is combined with vacuum pumps, connectors, gauges, and non-stick trays to optimize the finish.

What is the Methacrylate Desiccator 200 mm. for?

The main function is to promote the removal of residual gases and moisture in the finishing of concentrates. The Methacrylate Desiccator 200 mm. is also useful for preserving samples in a controlled environment with solid desiccants. The capacity of -740 mm/Hg helps speed up purging and drying processes under reproducible conditions and with less exposure to external contaminants. All this makes it a key piece among BHO tools aimed at a clean and stable result.

Extraction tool Methacrylate Desiccator 200 mm.

The set stands out for materials designed for demanding environments: polycarbonate lid for visibility, robust polypropylene base, neoprene in the gasket for sealing, and connections ready for standard hoses. The internal volume accommodates low containers and sheets on a tray, promoting even distribution. The tightness reduces air entry, stabilizes the process, and improves consistency between batches—a clear advantage for operators seeking repeatable processes within BHO Extraction Kits.

How is the Methacrylate Desiccator 200 mm. used?

Use is straightforward and safety-oriented: place the material in a suitable container or on the internal tray, close the lid aligning the neoprene gasket, and connect the vacuum line via the valve. Activate the pump until the desired vacuum level is reached and maintain the purge for the time required by the operator, always in a ventilated space and with appropriate PPE. To finish, slowly open the air inlet valve, allowing gradual pressure equalization before removing the material. This desiccator does not include a vacuum pump or connection set, so it is recommended to choose compatible accessories available at Hydroponics Blanes. Essential reminder: working with solvents requires compliance with current regulations, adequate ventilation, and zero sources of ignition.

Price Methacrylate Desiccator 200 mm.

The Methacrylate Desiccator 200 mm. offers a very competitive cost-performance ratio compared to heavier metal chambers. The durability of polycarbonate and polypropylene, together with the capacity of -740 mm/Hg, make it an efficient choice among BHO tools for consistent finishes.

Where to buy Methacrylate Desiccator 200 mm. online?

Available at Hydroponics Blanes, a trusted Grow Shop with discreet shipping. The online store —Grow Shop in Spain— ships to the peninsula and islands, and to EU countries such as France, Italy, Germany, Portugal, and the Netherlands. Along with the desiccator, the catalog includes BHO Accessories and components to complete BHO Extraction Kits: vacuum pumps, hoses, gauges, gaskets, trays, and non-stick containers.

The Methacrylate Desiccator 200 mm. stands out as a transparent, airtight, and easy-to-integrate chamber, designed for controlled purges and sample preservation.

The set of materials —polycarbonate, polypropylene, and neoprene— provides visibility, stability, and reliable sealing, ideal for those who need repeatable processes in BHO Extraction.

At Hydroponics Blanes there is support, compatible accessories, and discreet shipping to complete your work equipment.

• Diameter: Ø200 mm.
• Supported vacuum: -740 mm/Hg (≤ 20 mm/Hg loss in 24 h).
• Materials: polycarbonate lid, polypropylene base, neoprene gasket.
• Does not include: vacuum pump or connection set.

Sale prohibited to persons under 18 years old