Turbo 150 Extractor, 2 Speed (430–560 m3/h) Blauberg

Turbo Extractor 150 Blauberg 2 Speeds 430-560 m3/h. Air systems for indoor cultivation

The 150 mm model from Blauberg is designed to move large volumes of air with a remarkable balance between flow and noise. The double switching allows you to choose between a continuous workflow or an extra boost during thermal peaks.

It is compatible with 150 mm carbon filters, silencers and reducers, and fits in-line installations for extraction or intake.

Indicative datasheet: flow rate 405–520 m³/h, consumption 30–60 W, sound level 33–44 dB, 2455–1680 rpm, inlet diameter 150 mm, outlet 148 mm and dimensions 289 × 247 mm.

The design facilitates opening the motor block for quick maintenance, without the need to remove ducts. At Hydroponics Blanes, Grow Shop in Spain and Trusted Grow Shop, there is availability of compatible cannabis cultivation accessories, advice for sizing flow and discreet shipping with 24/48 h delivery (subject to availability) and free shipping from €40 (max. 25 kg), ideal for projects with cheap indoor grow tents.

Indoor Cultivation Turbo Extractor 150 Blauberg 2 Speeds 430-560 m3/h

In indoor cultivation scenarios of 100×100, 120×120 or larger technical rooms, the 150 mm diameter reduces pressure loss compared to narrow lines, improves heat evacuation under lights and stabilizes humidity after watering or misting. The combination with insulated duct and silencer increases acoustic comfort without penalizing flow.

What is the Turbo Extractor 150 Blauberg 2 Speeds 430-560 m3/h used for?

It is used to renew air, extract heat from the upper area of the tent, mitigate odors with a carbon filter and promote gas exchange (CO₂/O₂) during growth and flowering. The dual speed allows you to adjust the flow in case of temperature or humidity rises, keeping the climate stable during 18/6 or 12/12 photoperiods.

Indoor cultivation accessory Turbo Extractor 150 Blauberg 2 Speeds 430-560 m3/h

Acts as the central piece of the in-line ventilation system along with Sonoconnect/Aluconnect, metal clamps, aluminum tape, 150–125 reducers, silencers and climate controllers. Balanced housing and impeller reduce vibration, allowing installation on wall or ceiling with cushioned supports.

What is the Turbo Extractor 150 Blauberg 2 Speeds 430-560 m3/h used for?

• Main extraction in 1–1.44 m² tents or compact rooms.
• Fresh air intake from cold areas to lower interior temperature.
• Odor management with 150 mm carbon filters in line.
• Drying room ventilation and propagation areas with constant flow.
• Air renewal in technical rooms with electrical equipment.

Instructions for use Turbo Extractor 150 Blauberg 2 Speeds 430-560 m3/h

• Dimensioning flow: calculate volume (width × length × height) and multiply by 30–60 renewals/h. Check compatibility with the 405–520 m³/h range.
• Location: install at the top, establishing passive inlets or an intake fan at the bottom for upward flow.
• In-line installation: orient according to flow arrow; connect to 150 mm duct with clamps; minimize bends and excessive sections.
• Odor control: attach carbon filter to intake; seal joints with aluminum tape.
• Speed switching: use the low position for continuous operation and the high one during temperature or humidity peaks.
• Maintenance: open motor block for periodic cleaning of impeller and housing; check fastenings and wiring.
• Safety: install with power cut-off, avoid direct exposure to water and fix with cushioned anchors to reduce vibration.

Advantages of using Turbo Extractor 150 Blauberg 2 Speeds 430-560 m3/h

• Adjustable flow: dual speed to adapt ventilation according to grow climate.
• Energy efficiency: 30–60 W with great m³/h per W ratio.
• Low noise: 33–44 dB, suitable for discreet installations.
• Universal compatibility: 150 mm lines, 148 mm outlet, standard filters and accessories.
• Quick motor access: maintenance without removing ducts.
• Robust and compact format: 289 × 247 mm, optimal for cheap indoor grow tents and technical rooms.

Where to buy online a Turbo Extractor 150 Blauberg 2 Speeds 430-560 m3/h?

Available at Hydroponics Blanes, Trusted Grow Shop with a wide range of cannabis cultivation accessories, carbon filters, controllers and ducts. Service with discreet shipping, 24/48 h delivery (subject to availability) and free shipping from €40 up to 25 kg in mainland Spain. Technical team that helps choose flow and combine with filters and controllers for consistent results.

The Turbo Extractor 150 Blauberg 2 Speeds 430-560 m3/h is a powerful ventilation solution to stabilize climate in indoor cultivation spaces, with double switching, compatibility with Sonoconnect/Aluconnect and easy maintenance.

Key features: 405–520 m³/h, 30–60 W, 33–44 dB, 150/148 mm and 289 × 247 mm, available at Hydroponics Blanes, Grow Shop in Spain with expert service and discreet shipping.