RVK 315 mm Extractor A1 (1250 m3/h)

Buy Extractor for indoor cultivation RVK 315 mm. A1 (1250 M3/H)

The Extractor RVK 315 mm. A1 (1250 M3/H) belongs to the RVK range from Systemair, known for stable performance and low maintenance in installations that operate many hours a day. Fiberglass-reinforced plastic housing, high-reliability ebm papst motor and centrifugal turbine optimize available pressure to pass through bends, activated carbon filters and duct sections without significant losses.

Internal directional plates reduce turbulence and improve aerodynamic efficiency; all with IP44 protection, resettable thermal contacts and compatibility with speed control to adapt extraction to each phase of cultivation.

Highlighted specifications: approximate power 176 W, nominal current 0.773 A, speed close to 2387 rpm and working temperature up to 70 °C. The 315 mm flange ensures clean integration with flexible or rigid duct, silencers and standard reducers.

Thanks to a nominal flow rate of 1250 m³/h, the equipment eliminates heat sources, reduces excess humidity and renews CO₂ evenly, creating a stable microclimate for consistent flowering.

At Hydroponics Blanes, Grow Shop in Spain, it is available along with ducts, clamps, aluminum tape, controllers and a wide catalog of cannabis cultivation accessories and cheap indoor grow tents, with the attention of a trusted Grow Shop and logistics with discreet shipping.

Indoor Cultivation Extractor RVK 315 mm. A1 (1250 M3/H)

Properly sized extraction keeps VPD in productive ranges, avoids thermal stratification and limits condensation. Extractor RVK 315 mm. A1 (1250 M3/H) performs outstandingly in large tents and compact rooms with medium LED or HPS lighting, guaranteeing homogeneous gas exchange 24/7.

What is the Extractor RVK 315 mm. A1 (1250 M3/H) used for?

• Continuous air renewal: removal of heat and vapor to protect canopy and roots.
• Odor control: direct integration with 315 mm carbon filter sized to the flow rate.
• Real useful pressure: ability to overcome losses in bends, pre-filters and silencers.
• Energy efficiency: optimized flow/consumption ratio for prolonged operation.

Indoor cultivation accessory Extractor RVK 315 mm. A1 (1250 M3/H)

Among the essential cannabis cultivation accessories, this model stands out for its structural robustness, motor reliability and total compatibility with the 315 mm ecosystem. Resistant materials, design intended for humid areas and mounting in any position facilitate quick integration with standard ducts and filters.

What is the Extractor RVK 315 mm. A1 (1250 M3/H) used for?

Recommended use as the main extractor in 150×150, 120×240 tents or medium rooms (always sized by lighting power and duct length). It also fits as a regulated intake in spaces that require a supply of fresh filtered air and in drying areas, where a continuous and gentle flow avoids humidity peaks and accelerates process uniformity.

How to use Extractor RVK 315 mm. A1 (1250 M3/H)

1. Calculate target flow: room volume (m³) × renewals/h (30–60 as reference) and add losses for filter and bends.
2. Install in a high area to evacuate hot air; place inlets in a low area to create a homogeneous sweep.
3. Connect to 315 mm duct; seal joints with aluminum tape and secure with metal clamps.
4. Attach 315 mm carbon filter when odor control is a priority; choose a model compatible with 1250 m³/h.
5. Minimize bends and long runs; a straight layout preserves pressure and reduces aerodynamic noise.
6. Regulate speed with a suitable controller; adjust according to season and cultivation phase to stabilize climate and consumption.
7. Maintenance plan: pre-filter cleaning, duct inspection, checking fastenings and periodic vibration control.

Advantages of using Extractor RVK 315 mm. A1 (1250 M3/H)

• High flow of 1250 m³/h with stable centrifugal thrust.
• Low noise level compared to equivalent axial solutions.
• IP44 protection, resettable thermal contacts and suitable for humid areas.
• Total compatibility with 315 mm ducts, filters and silencers.
• Easy installation and minimal maintenance in intensive Indoor cultivation projects.

Where to buy an Extractor RVK 315 mm. A1 (1250 M3/H) online?

Available at Hydroponics Blanes, with specialized advice from a trusted Grow Shop, discreet shipping and everything you need: controllers, ducts, clamps, filters and cheap indoor grow tents. Secure purchase in a Grow Shop in Spain with extensive experience.

Those looking for powerful ventilation, quiet operation and wide compatibility will find in the Extractor RVK 315 mm. A1 (1250 M3/H) a reliable ally. Resistant components, stable flow and fine regulation allow you to maintain an optimal climate throughout the year, backed by the service of Hydroponics Blanes and logistics with discreet shipping that makes it easy to complete installations with reliable accessories and cheap indoor grow tents.