RVK 200 mm Extractor A1 (700 m3/h)

Best Online Price RVK 200 mm Extractor. A1 (700M3/H)

The RVK 200 mm Extractor. A1 (700M3/H) is aimed at installations that require constant air renewal with low noise level and maximum reliability. The high-strength technical plastic housing withstands humidity and prolonged sessions; the centrifugal turbine balances pressure and airflow to overcome losses in carbon filters and moderate duct sections.

The 200 mm standard ensures compatibility with flexible or rigid ducts, silencers, and commercial reducers.

With a nominal 700 m³/h, this extractor eliminates heat sources, reduces excess humidity, and promotes homogeneous gas exchange across the entire leaf surface. Easy installation with metal clamps and aluminum tape, low maintenance, and long service life make this reference a safe bet for cabinets with moderate LED or HPS lighting.

At Hydroponics Blanes, Grow Shop in Spain, it is available along with controllers, ducts, clamps, carbon filters, reducers, and a wide catalog of cannabis cultivation accessories and cheap indoor grow tents, with technical advice from a trusted Grow Shop and logistics with discreet shipping.

Indoor Cultivation RVK 200 mm Extractor. A1 (700M3/H)

Proper extraction determines thermal stability, controlled humidity, and CO₂ renewal. RVK 200 mm Extractor. A1 (700M3/H) maintains a homogeneous climate in medium cabinets or compact rooms, avoiding heat stratification and humidity pockets that hinder growth.

What is the RVK 200 mm Extractor. A1 (700M3/H) for?

• Renew the air continuously to remove heat and vapor.
• Control odors when working with a 200 mm carbon filter compatible with the airflow.
• Provide useful pressure to overcome bends, sleeves, and prefilters without losing performance.
• Optimize the microclimate and maintain a VPD within productive ranges.

Indoor cultivation accessory RVK 200 mm Extractor. A1 (700M3/H)

Among the essential cannabis cultivation accessories, this reference stands out for its robustness, silence, and total compatibility with 200 mm standards. Quick integration with ducts, grilles, silencers, and environmental controllers; ideal for working many hours a day while maintaining energy efficiency and system stability.

What is the RVK 200 mm Extractor. A1 (700M3/H) used for?

Recommended use as the main extractor in 120×120, 120×240 cabinets or compact rooms (always sizing according to lighting power and duct length). It is also useful as a regulated intake for supplying filtered fresh air or in drying rooms, where a continuous and gentle flow prevents humidity spikes and improves process uniformity.

How to use RVK 200 mm Extractor. A1 (700M3/H)

1. Calculate target airflow: room volume (m³) × air changes/hour (30–60 as a reference) and add losses for filter and bends.
2. Place in the upper area of the cabinet or room to evacuate hot air; place inlets in the lower area to create a homogeneous sweep.
3. Connect to a 200 mm duct; seal joints with aluminum tape and secure with clamps to prevent leaks.
4. Attach a 200 mm carbon filter when it is necessary to neutralize odor; choose a model compatible with 700 m³/h.
5. Minimize bends and long sections; a straight layout preserves pressure and reduces aerodynamic noise.
6. Check draft with a manual test or anemometer; check for vibrations and adjust supports to limit structural transmission.
7. Plan light maintenance: cleaning prefilters, checking ducts, and periodically tightening clamps.

Advantages of using RVK 200 mm Extractor. A1 (700M3/H)

• High airflow of 700 m³/h with stable centrifugal thrust.
• Silent operation for domestic environments.
• Total compatibility with 200 mm ducts, filters, and silencers.
• Easy installation and minimal maintenance.
• Reliability for prolonged work in Indoor cultivation systems.

Where to buy an RVK 200 mm Extractor. A1 (700M3/H) online?

Available at Hydroponics Blanes, with expert advice from a trusted Grow Shop, discreet shipping, and everything you need for Indoor cultivation: controllers, ducts, filters, and cheap indoor grow tents. Fast and secure purchase at a Grow Shop in Spain with extensive experience.

Those who prioritize climate stability, real odor control, and low noise will find a solid ally in the RVK 200 mm Extractor. A1 (700M3/H). Sturdy structure, generous airflow, and compatibility with 200 mm lines make it easy to install efficient ventilation systems with the support of Hydroponics Blanes, specialized attention, and discreet shipping throughout the peninsula.