RVK 150 mm Extractor A1 (400 m3/h)

Buy online Extractor RVK 150 mm. A1 (400 M3/H)

The Extractor RVK 150 mm. A1 (400 M3/H) belongs to a family of centrifugal fans designed to renew the air in grow cabinets and rooms continuously. The high-strength technical plastic housing withstands humid environments and long working hours, while the centrifugal turbine provides enough pressure to work with carbon filters and moderate duct runs.

This A1 model delivers a stable flow of 400 m³/h, approximate power of 60 W and a reference noise level close to 55 dB(A), an ideal balance between performance and acoustic discretion.

The 150 mm diameter facilitates compatibility with flexible or rigid ducts, silencers, grilles, and standard reducers. The set helps evacuate accumulated heat, reduce excess humidity, renew CO₂, and maintain a homogeneous microclimate throughout the cabinet volume. Integrated with suitable controllers, timers, or potentiometers, it adapts to seasonal changes and different cultivation phases.

At Hydroponics Blanes, Grow Shop in Spain, this extractor is presented alongside a complete catalog of cannabis cultivation accessories, clamps, aluminum tape, filters, and cheap indoor grow cabinets, with advice from a trusted Grow Shop and logistics with discreet shipping.

Indoor Cultivation Extractor RVK 150 mm. A1 (400 M3/H)

Well-sized extraction avoids hot spots, limits condensation, and keeps humidity within healthy ranges. Extractor RVK 150 mm. A1 (400 M3/H) provides flow and pressure for medium cabinets with moderate LED or HPS lighting, maintaining uniform gas exchange from the base to the canopy.

What is the Extractor RVK 150 mm. A1 (400 M3/H) for?

• 24/7 air renewal: continuous removal of heat and vapor to maintain proper VPD.
• Odor control: direct integration with 150 mm carbon filter compatible with the flow.
• Available pressure: capacity to overcome losses from elbows, sleeves, and pre-filters.
• Energy efficiency: good performance with moderate consumption close to 60 W.

Indoor cultivation accessory Extractor RVK 150 mm. A1 (400 M3/H)

Among the essential cannabis cultivation accessories, this model stands out for its robustness and stability. High-resistance plastic material, balanced impeller, and 150 mm flanges ensure quick and safe assembly with flexible or rigid duct. Recommended accessories: metal clamps, aluminum tape, anti-vibration sleeves, and conical reducer when required by the circuit.

What is the Extractor RVK 150 mm. A1 (400 M3/H) used for?

Used as the main extractor in 100×100, 120×120 or 120×240 cm cabinets (always sizing according to lighting power and duct length); as an intake fan to supply filtered fresh air in rooms; and as support equipment in drying areas, where a constant flow is needed to avoid humidity peaks and improve process uniformity.

How to use Extractor RVK 150 mm. A1 (400 M3/H)

1. Calculate target flow: enclosure volume (m³) × air changes/hour (30–60 as reference) and add pressure losses from filter and elbows.
2. Install in the upper area of the cabinet to evacuate hot air; place the air inlet at the bottom to create a homogeneous sweep.
3. Connect to 150 mm duct; seal joints with aluminum tape and secure with clamps to prevent leaks.
4. Attach 150 mm carbon filter when it is necessary to neutralize odor; choose a model compatible with 400 m³/h.
5. Minimize the number of elbows and long runs; a straight layout preserves pressure and reduces aerodynamic noise.
6. Check draft with a manual test or anemometer; check for vibrations and adjust supports to limit structural transmission.
7. Plan light maintenance: cleaning pre-filters, checking ducts, and tightening clamps to maintain nominal flow.

Advantages of using Extractor RVK 150 mm. A1 (400 M3/H)

• Quiet in continuous operation, ideal for domestic environments.
• Flow and pressure sufficient for medium cabinets with odor filtration.
• Moderate consumption close to 60 W with good durability.
• Compatibility with standard 150 mm ducts, filters, reducers, and silencers.
• Easy assembly and minimal maintenance thanks to robust construction.

Where to buy online an Extractor RVK 150 mm. A1 (400 M3/H)?

Available at Hydroponics Blanes, with expert attention from a trusted Grow Shop, discreet shipping and everything needed for Indoor cultivation: controllers, ducts, filters, and cheap indoor grow cabinets. Secure purchase at a Grow Shop in Spain with extensive experience.

Those seeking a balance between power, silence, and ease of assembly will find in the Extractor RVK 150 mm. A1 (400 M3/H) a reliable solution.

Resistant housing, stable centrifugal thrust, and wide compatibility with accessories make this equipment a solid ally for domestic and semi-professional projects backed by Hydroponics Blanes and agile service with discreet shipping.