Max-Fan Pro 250 Extractor (1660 m3/h) Can-Fan

Extractor Max-Fan Pro 250 (1660 M3/h) Can-Fan

The Extractor Max-Fan Pro 250 (1660 M3/h) Can-Fan belongs to the high-pressure mixed range, designed to move large volumes of air with contained consumption.

The rotor–stator assembly straightens the flow and reduces turbulence, resulting in less pressure loss through carbon filters, bends, and long duct runs.

The compact body makes it easy to hang from the ceiling or wall, while the 250 mm flange ensures compatibility with standard ducts. The high-performance motor incorporates thermal protection to stop the equipment in dangerous temperatures and keep the installation safe during intensive sessions.

The aerodynamic design reduces mechanical hum and aerodynamic noise, which is key in projects where silence makes the difference. The Max-Fan Pro series works especially well as the main extractor in large grow tents and grow rooms with powerful lights; the 1660 m³/h flow ensures constant air renewal, temperature and humidity control, and helps neutralize odors when integrated with proper filtration.

At Hydroponics Blanes, Grow Shop in Spain, this model is available along with a wide catalog of cannabis growing accessories, clamps, reducers, controllers, and cheap indoor grow tents, with service from a trusted Grow Shop and discreet shipping.

Indoor Growing Extractor Max-Fan Pro 250 (1660 M3/h) Can-Fan

A well-calculated extraction system prevents hot spots, reduces accumulated humidity, and renews CO₂ throughout the volume. Extractor Max-Fan Pro 250 (1660 M3/h) Can-Fan stands out for available static pressure and uniform flow, qualities that maintain a stable climate even with carbon filters and duct runs with bends.

What is the Extractor Iso-Mix 200 (790-1035 M3/h) used for?

The heading refers to another model from the soundproofed family. The basic function matches that of the equipment described here: renew air, remove heat and humidity, and facilitate odor control when the circuit includes filtration. In the case of the Extractor Max-Fan Pro 250 (1660 M3/h) Can-Fan, the higher flow margin enables larger tents and runs with higher losses.

Indoor growing accessory Extractor Max-Fan Pro 250 (1660 M3/h) Can-Fan

Among the benchmark cannabis growing accessories, this extractor combines performance, efficiency, and compact format. The 250 mm flange ensures compatibility with flexible or rigid ducts, grilles, and silencers; the housing allows quick maintenance and wiring inspection; the rotor–stator assembly provides useful pressure to overcome filters and system accessories.

What is the Extractor Iso-Mix 200 (790-1035 M3/h) used for?

The Iso-Mix 200 mm version is usually used in medium tents or as a silent intake fan. When the project requires more flow and pressure, the Extractor Max-Fan Pro 250 (1660 M3/h) Can-Fan takes on main extraction in large tents (e.g., 120×240, 150×150, 200×200 cm, always sizing according to lighting power and duct length) and rooms where thermal management requires a strong response.

Instructions for use Extractor Max-Fan Pro 250 (1660 M3/h) Can-Fan

1. Calculate need: enclosure volume (m³) × renewals/hour (30–60 as reference) and add losses for filter and bends.
2. Install in a high area to evacuate accumulated hot air; plan the duct run as straight as possible.
3. Connect to 250 mm duct and, if applicable, to an equivalent carbon filter; seal joints with aluminum tape and clamps.
4. Hang with straps and anti-vibration plugs; check fastenings to avoid structural transmission.
5. Check draft with hand or anemometer; check for leaks at joints and clamp tightness after the first few hours.
6. Schedule maintenance: pre-filter cleaning, duct inspection, and periodic wiring condition check.

Advantages of using Extractor Max-Fan Pro 250 (1660 M3/h) Can-Fan

• High flow of 1660 m³/h with compact format.
• Available static pressure thanks to mixed rotor–stator design.
• Lower perceived noise compared to axial fans of equal flow.
• Thermal protection and robust construction for continuous work.
• Compatibility with 250 mm accessories: filters, silencers, reducers, and grilles.

Where to buy an Extractor Iso-Mix 200 (790-1035 M3/h) online?

The complete range of ventilation for growing, including the Extractor Max-Fan Pro 250 (1660 M3/h) Can-Fan, is available at Hydroponics Blanes, with discreet shipping and expert service from a trusted Grow Shop. Catalog of Indoor growing, controllers, ducts, and cheap indoor grow tents for safe purchase at Grow Shop in Spain.

Extractor Max-Fan Pro 250 (1660 M3/h) Can-Fan represents a successful balance between power, silence, and efficiency. Clear assembly, compatibility with filters, and solid response to thermal peaks make this extractor an ally for any installation. At Hydroponics Blanes there is technical advice and discreet shipping to complete equipment and cannabis growing accessories with consistent results throughout the year.