Iso-Mix 200 Extractor Fan (790–1035 m3/h)

Buy Iso-Mix 200 Extractor (790-1035 M3/h) Cheap

The Iso-Mix 200 Extractor (790-1035 M3/h) is designed for installations that require high airflow, good pressure, and low noise levels. The metal body provides rigidity, while the interior incorporates 50 mm acoustic foam that dampens vibrations and aerodynamic noise.

A three-position switch (VEL 1 / OFF / VEL 2) allows you to select the appropriate flow for each stage of cultivation. Highlighted technical data: minimum flow 790 m³/h and maximum 1035 m³/h, inlet diameter 200 mm and outlet 198 mm, approximate speed 2000–2460 rpm, consumption 78–110 W, reference noise level 31–36 dB, dimensions 550 × 295 mm, and weight 8 kg.

The electronics include thermal protection that shuts off the unit in case of risky temperatures. The integrated mounting bracket simplifies ceiling or wall installation with anti-vibration straps. Thanks to the available pressure, this model works with 200 mm ducts and can be integrated with suitable carbon filtration for odor control.

At Hydroponics Blanes, Grow Shop in Spain, you will find a complete ecosystem of cannabis cultivation accessories, ducts, clamps, controllers, and cheap indoor grow tents, with specialized advice and discreet shipping.

Installation note: connection cable not included; purchase separately according to project needs.

Indoor Cultivation Iso-Mix 200 Extractor (790-1035 M3/h)

Proper ventilation reduces hot spots, stabilizes humidity, and maintains adequate CO₂ levels. Iso-Mix 200 Extractor (790-1035 M3/h) excels in medium tents and compact rooms where silence matters as much as performance, providing adjustable airflow and real acoustic attenuation.

What is the Iso-Mix 200 Extractor (790-1035 M3/h) for?

• Continuously renew the air, removing excess heat and vapor.
• Control odors by integrating with compatible 200 mm carbon filters.
• Provide useful pressure to overcome losses from bends and duct entries.
• Adjust airflow with two speeds depending on season, photoperiod, and thermal load.

Indoor cultivation accessory Iso-Mix 200 Extractor (790-1035 M3/h)

Among the essential cannabis cultivation accessories, this reference combines robustness, silence, and efficiency. The steel housing withstands intensive use; the 50 mm insulated chamber reduces humming; the standard 200 mm flange ensures compatibility with flexible or rigid ducts, grilles, reducers, and silencers in the sector.

What is the Iso-Mix 200 Extractor (790-1035 M3/h) used for?

Recommended use as the main extractor in medium to large tents (always sizing according to lighting power and duct length), as a silent intake fan when adjustable fresh air is needed, and as support in drying rooms, where a constant flow prevents humidity spikes and improves process uniformity.

How to use Iso-Mix 200 Extractor (790-1035 M3/h)

1. Calculate target airflow: room volume (m³) × air changes per hour (reference 30–60) and add losses from filter and duct run.
2. Place the unit in a high area to evacuate accumulated hot air; plan a short route with few bends.
3. Connect to 200 mm duct and, if applicable, to a carbon filter of the same diameter; seal joints with aluminum tape and clamps.
4. Secure with the integrated mounting bracket; add straps or anti-vibration plugs for less structural noise.
5. Select speed: VEL 1 for gentle supply and VEL 2 when thermal load increases.
6. Check draft with hand or anemometer; inspect for leaks and noises at joints, readjusting clamps if necessary.
7. Plan light maintenance: clean pre-filters and ducts to maintain 790–1035 m³/h and low noise level.

Advantages of using Iso-Mix 200 Extractor (790-1035 M3/h)

• Real silence thanks to 50 mm insulating foam (≈31–36 dB).
• Energy efficiency with 78–110 W consumption and stable performance.
• Two speeds (VEL 1 / OFF / VEL 2) to modulate airflow without complexity.
• Total compatibility with 200 mm flanges, filters, reducers, and silencers.
• Quick installation via integrated mounting and compact size 550 × 295 mm.

Where to buy an Iso-Mix 200 Extractor (790-1035 M3/h) online?

Available at Hydroponics Blanes, trusted Grow Shop with discreet shipping. Complete catalog of Indoor cultivation, controllers, ducts, and cheap indoor grow tents. Secure purchase at Grow Shop in Spain with advice to size ventilation according to tent size, lighting power, and system layout.

Indicative technical data: Min. flow 790 m³/h • Max. flow 1035 m³/h • Inlet 200 mm • Outlet 198 mm • Speeds: 2 • rpm 2000–2460 • Consumption 78–110 W • Noise level 31–36 dB • Dimensions 550 × 295 mm • Weight 8 kg • thermal protection • insulation 50 mm • steel housing.

For projects that prioritize silence, adjustable airflow, and easy installation, the Iso-Mix 200 Extractor (790-1035 M3/h) is the ideal ally: soundproof chamber, two speeds, and compatibility with odor filtration allow you to maintain a stable microclimate.

With the support of Hydroponics Blanes and discreet shipping, it is easy to complete efficient Indoor cultivation systems with consistent performance throughout the year.