Iso-Mix 150 Extractor Fan (410–550 m³/h)

Iso-Mix 150 Extractor (410-550 m3/h) - air circulation control

The Iso-Mix 150 Extractor (410-550 m3/h) is designed for installations that require high airflow, good pressure, and low noise levels. The metal housing provides rigidity and longevity, while the interior lined with 50 mm acoustic foam dampens humming and aerodynamic noise.

The front switch allows you to choose between two speeds (VEL 1 / OFF / VEL 2), adjusting the flow according to heat load, schedule, or crop phase. Key specifications: minimum flow 410 m³/h and maximum 550 m³/h, inlet diameter 150 mm and outlet 148 mm, approximate rotation speed 1985–2640 rpm, consumption of 45–52 W, reference sound level 26–33 dB, dimensions 579 × 263 mm and weight 4.6 kg. The electronics include thermal protection for motor safety.

The integrated mounting bracket simplifies installation on ceiling or wall with anti-vibration straps. Combined with 150 mm duct and carbon filter, it provides effective odor control, constant gas exchange, and a stable microclimate.

This model fits medium tents, drying rooms, and mother chambers, easily integrating into existing lines.

At Hydroponics Blanes, Grow Shop in Spain, you will find a wide range of cannabis growing accessories, ducts, clamps, controllers, and cheap indoor grow tents with technical support and discreet shipping from a trusted Grow Shop.

Indoor Growing Iso-Mix 150 Extractor (410-550 m3/h)

A well-sized extraction system prevents hot spots, reduces excessive humidity, and renews CO₂ throughout the volume. Iso-Mix 150 Extractor (410-550 m3/h) combines soundproofing and sufficient pressure to work with short runs and filtration, maintaining climate stability in medium-sized tents.

What is the Iso-Mix 150 Extractor (410-550 m3/h) for?

• Constant air renewal: removal of accumulated heat and vapor.
• Odor control: integration with 150 mm carbon filter.
• Available pressure: capacity to overcome moderate losses due to bends and accessories.
• Energy saving: high performance with 45–52 W consumption.

Indoor growing accessory Iso-Mix 150 Extractor (410-550 m3/h)

Among the recommended cannabis growing accessories, this reference stands out for its balance between flow and silence. Steel housing, 50 mm insulation, standard 150/148 mm flanges, and two-speed switch make it easy to integrate with ducts, reducers, grilles, and silencers.

What is the Iso-Mix 150 Extractor (410-550 m3/h) used for?

Used as the main extractor in medium tents; as a silent intake fan when fresh air injection requires adjustable flow; as support in drying rooms to avoid humidity spikes; and to eliminate hot air pockets near lights through short runs.

How to use Iso-Mix 150 Extractor (410-550 m3/h)

1. Calculate target flow: room volume (m³) × air changes/hour (30–60 as a general reference).
2. Place in a high area to evacuate hot air; plan a short run with minimal bends.
3. Connect to 150 mm duct and, if applicable, to a carbon filter of the same diameter; seal joints with aluminum tape.
4. Secure with the integrated mounting bracket and use anti-vibration straps to reduce structural noise.
5. Select speed: VEL 1 for gentle supply and VEL 2 for times of higher heat load.
6. Check draft with hand or anemometer; check for possible leaks and adjust clamps.
7. Schedule light maintenance: clean pre-filters and ducts to maintain 410–550 m³/h and sound level 26–33 dB.

Advantages of using Iso-Mix 150 Extractor (410-550 m3/h)

• Real soundproofing thanks to 50 mm foam.
• Two speeds (VEL 1 / OFF / VEL 2) to modulate flow in each phase.
• Energy efficiency with 45–52 W consumption.
• Compatibility with 150/148 mm flanges, filters, reducers, and silencers.
• Quick installation with integrated mounting bracket and compact size 579 × 263 mm.

Where to buy an Iso-Mix 150 Extractor (410-550 m3/h) online?

Available at Hydroponics Blanes, trusted Grow Shop with discreet shipping. Complete catalog of Indoor growing, controllers, ducts, and cheap indoor grow tents. Secure purchase at a Grow Shop in Spain with advice to size ventilation according to tent size, lighting power, and system layout.

Featured technical sheet: Flow 410–550 m³/h • Inlet 150 mm • Outlet 148 mm • Speeds: 2 • rpm 1985–2640 • Consumption 45–52 W • Sound level 26–33 dB • Size 579 × 263 mm • Weight 4.6 kg • thermal protection • insulation 50 mm • steel housing.

For those seeking silence, available pressure, and easy handling, Iso-Mix 150 Extractor (410-550 m3/h) is a solid choice: adjustable flow, acoustic chamber, and robust construction make it easy to maintain a stable environment. With expert support from Hydroponics Blanes and discreet shipping, it is easy to complete efficient Indoor growing systems with consistent results.