Iso-Mix 125 Extractor Fan (235–347 m3/h)

Extractor Iso-Mix 125 (235-347 m3/h) - Soundproofed Solution

The Extractor Iso-Mix 125 (235-347 m3/h) is designed for those seeking stable airflow, sufficient pressure, and low noise levels in compact grow spaces. The metal body provides rigidity and reduces vibrations, while the interior with 50 mm foam dampens aerodynamic noise without compromising performance.

The front switch allows you to choose between two speeds (VEL 1 / OFF / VEL 2) to adapt the flow to each phase of the cycle or to seasonal changes.

Key technical data: minimum airflow 235 m³/h and maximum 347 m³/h, inlet diameter 125 mm and outlet 123 mm, rotation speed ≈1660–2315 rpm, power consumption 25–29 W, reference sound level ≈23–28 dB, dimensions 474 × 251 mm and weight 4.6 kg. It features thermal protection to safeguard the motor in demanding environments and a mounting bracket that simplifies wall or ceiling installation with anti-vibration straps.

The Iso-Mix line works especially well in short runs with 125 mm flexible ducting and is compatible with carbon filters of the same diameter for odor control.

This extractor fits medium tents, mother rooms, drying rooms, and areas where constant ventilation must go unnoticed. Complete the installation with ducts, clamps, reducers, and controllers from the Hydroponics Blanes catalog, a Grow Shop in Spain with a wide selection of cannabis growing accessories and cheap indoor grow tents, expert advice, and discreet shipping from a true trusted Grow Shop.

The connection cable can be purchased separately according to the needs of the electrical line.

Indoor Growing Extractor Iso-Mix 125 (235-347 m3/h)

In indoor growing it is essential to renew the air continuously to stabilize temperature, humidity, and CO₂ levels. Extractor Iso-Mix 125 (235-347 m3/h) offers adjustable airflow with acoustic insulation, ideal for maintaining a homogeneous microclimate without increasing ambient noise.

What is the Extractor Iso-Mix 125 (235-347 m3/h) for?

• Constant air renewal: removal of heat and excess humidity.
• Odor control: integration with 125 mm carbon filter.
• Useful pressure: ability to overcome moderate losses in bends and short runs.
• Airflow adjustment: two speeds to adapt flow to each phase and schedule.

Indoor growing accessory Extractor Iso-Mix 125 (235-347 m3/h)

Among the essential cannabis growing accessories, this unit combines silence, efficiency, and ease of assembly. The steel casing extends service life, the 50 mm insulation reduces humming, and the 125 mm flange ensures compatibility with standard ducts and grilles.

What is the Extractor Iso-Mix 125 (235-347 m3/h) used for?

Recommended use as the main extractor in medium tents, as a silent intake fan in propagation and mother rooms, and as support in drying rooms to maintain smooth and constant airflow. It is also useful in duct pass-throughs near lights to evacuate hot air pockets.

How to use Extractor Iso-Mix 125 (235-347 m3/h)

1. Calculate target airflow: room volume (m³) × air changes/h (reference 30–60).
2. Install in a high area to evacuate hot air; plan short runs with few bends.
3. Connect to 125 mm duct and, if applicable, to a carbon filter of the same diameter.
4. Seal joints with aluminum tape and secure with clamps; use anti-vibration straps.
5. Select speed: VEL 1 for gentle supply and VEL 2 when thermal load increases.
6. Check draft with hand or anemometer; check for leaks and noise at joints.
7. Perform light maintenance: clean pre-filters and ducts to maintain 235–347 m³/h and low noise level.

Advantages of using Extractor Iso-Mix 125 (235-347 m3/h)

• Real silence thanks to 50 mm insulating foam (≈23–28 dB).
• Low consumption: 25–29 W with stable performance.
• Two speeds to modulate airflow according to climate and photoperiod.
• Quick installation with integrated mounting bracket and compact design.
• Compatibility with 125 mm flanges, filters, reducers, and silencers.

Where to buy an Extractor Iso-Mix 125 (235-347 m3/h) online?

At Hydroponics Blanes, trusted Grow Shop, you can buy the Extractor Iso-Mix 125 (235-347 m3/h) with discreet shipping. Complete catalog of indoor growing, controllers, ducts, and cheap indoor grow tents. Secure shopping at Grow Shop in Spain with advice to size ventilation according to tent size and lighting power.

Indicative technical sheet: Min. airflow 235 m³/h • Max. airflow 347 m³/h • Inlet 125 mm • Outlet 123 mm • Speeds: 2 • rpm ≈1660–2315 • Consumption 25–29 W • Sound level ≈23–28 dB • Dimensions 474 × 251 mm • Weight 4.6 kg • thermal protection • 50 mm insulation • steel chassis.

For installations that prioritize acoustic discretion, efficiency, and airflow regulation, the Extractor Iso-Mix 125 (235-347 m3/h) stands out for its robust construction and soundproofed chamber. With the support of Hydroponics Blanes, discreet shipping, and a wide range of components, it is easy to complete versatile and reliable indoor growing systems.