ISO-MAX 315 Extractor Fan (3260 m3/h)

ISO-MAX 315 Extractor (3260 M3/H) Indoor Cultivation

The ISO-MAX 315 Extractor (3260 M3/H) combines Max-Fan technology inside a metal silencer with acoustic foam. The rotor–stator assembly transforms the fan's swirl into a uniform jet, reducing turbulence, pressure loss, and aerodynamic noise.

This is a single-speed unit designed to work for many hours with stability, providing enough useful pressure to overcome carbon filters, bends, and long duct runs.

Reference data sheet: flow rate 3260 m³/h, Ø 315 mm, ≈2772 rpm, approx. consumption 510 W, 3.2 A and reference acoustic index ≈81 dB on bench. The galvanized metal housing integrates hooks for hanging with anti-vibration straps; the motor has thermal protection (TMI) and Class F insulation for electrical safety.

The cylindrical format facilitates installation aligned with the duct flow, achieving powerful air renewal that stabilizes VPD, limits hot spots, and maintains exterior discretion when combined with suitable carbon filters.

At Hydroponics Blanes, Grow Shop in Spain, it is available along with cannabis cultivation accessories, clamps, reducers, controllers, and cheap indoor grow tents, with technical advice and discreet shipping.

Indoor Cultivation ISO-MAX 315 Extractor (3260 M3/H)

In professional Indoor cultivation, extraction determines microclimate stability. ISO-MAX 315 Extractor (3260 M3/H) provides high flow and static pressure to work with odor filtration, silencers, and complex runs, maintaining temperature and humidity within target ranges throughout the cycle.

What is the ISO-MAX 315 Extractor (3260 M3/H) for?

• Forceful air renewal: removal of heat, excess humidity, and aromatic compounds.
• Odor control: direct integration with 315 mm carbon filter.
• Available pressure: ability to overcome pressure losses in bends and long runs.
• Climate stability: support for proper VPD, efficient transpiration, and vigorous growth.

Indoor cultivation accessory ISO-MAX 315 Extractor (3260 M3/H)

Among the leading cannabis cultivation accessories, this unit stands out for internal soundproofing and advanced aerodynamics. The galvanized metal body withstands intensive use and the standard flange facilitates compatibility with flexible or rigid ducts, reducers, grilles, and silencers.

What is the ISO-MAX 315 Extractor (3260 M3/H) used for?

Used as the main extractor in XXL tents (e.g., 150×150, 120×240, 200×200 cm, depending on lighting power and duct length) and in grow rooms where odor control and thermal management require high flow. It is also useful in drying rooms, maintaining a constant flow that prevents humidity spikes.

How to use ISO-MAX 315 Extractor (3260 M3/H)

1. Calculate required flow: room volume (m³) × air changes/hour (30–60 as reference).
2. Place the equipment in a high area to evacuate accumulated hot air and promote natural draft.
3. Connect to duct and 315 mm carbon filter; minimize sharp bends and excessive lengths.
4. Seal joints with aluminum tape and secure with clamps; hang with anti-vibration straps.
5. Check flow with an anemometer or manual test and ensure there are no leaks at joints.
6. Plan maintenance: clean pre-filters and ducts to maintain 3260 m³/h and acoustic level.
7. Check operating temperature; TMI protection disconnects in critical scenarios.

Advantages of using ISO-MAX 315 Extractor (3260 M3/H)

• Integrated soundproofing with acoustic foam that dampens humming.
• Rotor–stator that straightens the flow and improves useful pressure in the duct.
• Very high flow of 3260 m³/h for large tents and compact rooms.
• Electrical safety: Class F insulation and motor thermal protection (TMI).
• Total compatibility with standard 315 mm accessories and odor filtration systems.

Where to buy an ISO-MAX 315 Extractor (3260 M3/H) online?

Available at Hydroponics Blanes, with discreet shipping and specialized service from a trusted Grow Shop. Complete catalog of Indoor cultivation, carbon filters, controllers, ducts, and cheap indoor grow tents. Secure purchase at Grow Shop in Spain with a guide to size extraction according to LED power and system layout.

Indicative technical data: Max flow 3260 m³/h • Diameter 315 mm • Speeds: 1 • Max speed ≈2772 rpm • Consumption ≈510 W • Current ≈3.2 A • Sound level ≈81 dB • Construction in galvanized metal with acoustic foam.

The ISO-MAX 315 Extractor (3260 M3/H) solves ventilation and odor control in demanding interiors: high flow, available static pressure, and soundproofing in a single body. Direct integration with ducts and filtration, plus support from Hydroponics Blanes and discreet shipping, allow efficient Indoor cultivation systems to be installed with consistent results from day one.