Iso-Max 250 Extractor Fan (2310 m3/h) 1 Speed

Iso-Max 250 Extractor (2310 m3/h) 1 speed - Soundproof Extractor

The Iso-Max 250 Extractor (2310 m3/h) 1 speed integrates rotor–stator technology inside a galvanized metal body with internal insulation. This assembly directs the flow in a uniform jet, reduces turbulence, and maintains static pressure even with carbon filters, bends, and long sections.

The unit delivers 2310 m³/h with 1 speed, a maximum rate of ≈2826 rpm and consumption of ≈281 W, values suitable for intensive climates where extraction must work for many hours. The nominal sound level is around ≈77 dB on the bench; the foam chamber reduces hum and vibrations compared to conventional extractors of the same flow rate.

Connection to 230 V ~, TMI thermal protection, Class F insulation, and 250 mm flanges to attach flexible or rigid duct. Approximate dimensions 680 × 354 mm and weight in the range ≈8–13.4 kg depending on the version.

Integrated hooks make it easy to hang from ceilings or walls with anti-vibration straps. Overall, you get high flow, stable useful pressure, and less aerodynamic noise, key to maintaining temperature, humidity, and odor control in modern grow spaces.

Available at Hydroponics Blanes, Grow Shop in Spain, with discreet shipping, advice, and a complete catalog of cannabis cultivation accessories and cheap indoor grow tents from a genuine trusted Grow Shop.

Indoor Growing Iso-Max 250 Extractor (2310 m3/h) 1 speed

Powerful extraction stabilizes the microclimate: fewer hot spots, controlled humidity, and constant CO₂ renewal. Iso-Max 250 Extractor (2310 m3/h) 1 speed performs especially well in XL tents and compact rooms with odor filtration, where the required pressure increases due to losses in the circuit.

What is the Iso-Max 250 Extractor (2310 m3/h) 1 speed for?

• Intense air renewal: removal of heat, excess humidity, and aromatic compounds.
• Odor control: direct integration with 250 mm carbon filter.
• Available static pressure: overcoming bends, silencers, and long sections.
• Climate stability: support for proper VPD and vigorous growth in all phases.

Indoor growing accessory Iso-Max 250 Extractor (2310 m3/h) 1 speed

Among the essential cannabis cultivation accessories, this model combines high flow with internal soundproofing. The cylindrical body in galvanized metal provides robustness, while the aerodynamic design reduces pressure losses. Full compatibility with standard clamps, reducers, silencers, and environmental controllers.

What is the Iso-Max 250 Extractor (2310 m3/h) 1 speed used for?

Recommended use as the main extractor in tents of 120×240, 150×150, or 200×200 cm (sized according to lighting power and duct length). Suitable for grow rooms with large filters, for drying rooms where regular flow is needed, and for pre-climatizing inlets when injection requires support.

How to use Iso-Max 250 Extractor (2310 m3/h) 1 speed

1) Calculate need: room volume (m³) × air changes per hour (30–60 as a reference).
2) Install in the upper area of the space to evacuate accumulated hot air.
3) Attach to 250 mm duct and carbon filter of the same diameter; limit bends and excessive sections.
4) Seal joints with aluminum tape and clamps; use anti-vibration straps for hanging.
5) Check flow with hand or anemometer; verify absence of leaks and aerodynamic noise at joints.
6) Keep pre-filters and ducts clean to maintain 2310 m³/h and contained noise level.
7) Monitor working temperature; TMI protection shuts off the unit in dangerous scenarios.

Advantages of using Iso-Max 250 Extractor (2310 m3/h) 1 speed

• Integrated soundproofing with acoustic foam for less perceived hum.
• Rotor–stator assembly that straightens the flow and improves useful pressure.
• High flow 2310 m³/h for large tents and compact rooms.
• Electrical safety: Class F, TMI and operation at 230 V ~.
• Practical installation with hooks, 250 mm flanges and compatibility with standard accessories.

Where to buy an Iso-Max 250 Extractor (2310 m3/h) 1 speed online?

At Hydroponics Blanes the Iso-Max 250 Extractor (2310 m3/h) 1 speed is available with discreet shipping. Catalog of Indoor growing, filters, controllers, and cheap indoor grow tents, with support to size extraction according to LED power and duct layout. Secure purchase at Grow Shop in Spain and specialized attention from a trusted Grow Shop.

Technical features: Max flow 2310 m³/h • Inlet diameter 250 mm • Speeds: 1 • Max speed ≈2826 rpm • Consumption ≈281 W • Current ≈1.7 A • Sound level ≈77 dB • Dimensions 680 × 354 mm • Weight ≈8–13.4 kg • Material galvanized metal • Insulation Class F • Motor protection TMI • Power supply 230 V ~.

With Iso-Max 250 Extractor (2310 m3/h) 1 speed you get intense ventilation, available static pressure, and noise attenuation inside a soundproofed body. Direct integration with ducts and filtration, easy maintenance, and availability at Hydroponics Blanes with discreet shipping make for an efficient climate control system for any Indoor growing project.