Iso-Max 150 Extractor Fan (410 m3/h) 3 Speed

Silent fan - ISO-MAX 150/410 3 Speed CAN-FAN Extractor

The ISO-MAX 150/410 3 Speed CAN-FAN Extractor belongs to Can-Fan's professional range, recognized in horticultural ventilation for combining performance, efficiency, and low noise level. The architecture integrates a high-performance fan in a cylindrical body with acoustic insulation, which reduces vibrations and aerodynamic noise.

The designation 150/410 identifies a 150 mm diameter for duct connection and a typical flow range around 410 m³/h* in standard configurations, sufficient to handle medium-sized tents with a carbon filter and several bends without a sharp drop in performance.

The motor incorporates reliable electronics and robust bearings for continuous work, with 3 selectable speeds that adjust extraction to the real needs of the environment: higher flow in warm hours, moderate power at night or during rooting.

The design favors useful duct pressure, something key when the circuit includes carbon filters, silencers, and long runs. With clean installation on a 150 mm flange, this equipment improves thermal control, stabilizes humidity, renews CO₂, and helps with odor control.

Available at Hydroponics Blanes, Grow Shop in Spain, with discreet shipping, advice, and a complete ecosystem of cannabis growing accessories and cheap indoor grow tents for a balanced and efficient setup. *The exact datasheet may vary depending on the version; check the manufacturer's specifications for specific data.

Indoor Growing Extractor ISO-MAX 150/410 3 Speed CAN-FAN

In indoor growing installations, it is advisable to have extraction capable of maintaining stable flow even with pressure losses. The ISO-MAX 150/410 3 Speed CAN-FAN Extractor provides pressure and quiet operation, keeping temperature and humidity within target ranges and distributing air evenly in tents and compact rooms.

What is the ISO-MAX 150/410 3 Speed CAN-FAN Extractor for?

• Effective air renewal: removal of heat, excess humidity, and aromatic compounds.
• Climate stability: helps maintain proper VPD, improving transpiration and assimilation.
• Integration with filtration: works together with 150 mm carbon filters for odor control.
• Operational flexibility: 3 speeds to adapt extraction to season and photoperiod.

Indoor growing accessory ISO-MAX 150/410 3 Speed CAN-FAN Extractor

Classified among the leading cannabis growing accessories, it stands out for its soundproofed body, high static pressure, and three-step switching wiring. The 150 mm flange ensures compatibility with flexible or rigid ducts, sleeves, clamps, and silencers common in domestic and semi-professional installations.

What is the ISO-MAX 150/410 3 Speed CAN-FAN Extractor used for?

It is used as the main extractor in 100×100, 120×120 tents or compact rooms (depending on lighting power and duct length); also in drying rooms where a regular flow with contained noise is needed. The 3 Speed switching allows extraction sizing for growth, flowering, and nighttime periods.

How to use ISO-MAX 150/410 3 Speed CAN-FAN Extractor

1) Calculate target flow: volume (m³) × renewals/hour (reference 30–60).
2) Mount at the top of the enclosure to evacuate accumulated hot air.
3) Connect to 150 mm duct and to carbon filter of the same diameter if applicable; minimize bends.
4) Seal joints with aluminum tape and use clamps to avoid leaks and pressure losses.
5) Select one of the 3 speeds according to temperature, RH, and schedule; adjust with controller if used.
6) Check draft with hand or anemometer; periodically check vibrations and fixings.
7) Keep filter and ducts clean to preserve flow and noise level.

Advantages of using ISO-MAX 150/410 3 Speed CAN-FAN Extractor

• Silence and soundproofing: housing designed to attenuate aerodynamic noise.
• High static pressure: stable performance with demanding filters and layouts.
• Triple speed: fine adjustment of flow for each stage of cultivation.
• Reliability: robust motor and durable bearings for continuous service.
• Clean installation: 150 mm flange and compatibility with industry standard accessories.

Where to buy an ISO-MAX 150/410 3 Speed CAN-FAN Extractor online?

At Hydroponics Blanes, trusted Grow Shop, the ISO-MAX 150/410 3 Speed CAN-FAN Extractor is available with discreet shipping throughout the peninsula. Complete catalog of indoor growing, controllers, filters, and cheap indoor grow tents. Secure purchase at Grow Shop in Spain with technical assistance to size extraction, filtration, and duct layouts.

The ISO-MAX 150/410 3 Speed CAN-FAN Extractor brings together silence, useful pressure, and versatility in a single unit, perfect for controlling climate, odor, and air renewal all year round.

Direct integration with 150 mm flange, three-step switching, and compatibility with filters make this reference a practical choice for those seeking climate stability without complications, with expert support and discreet shipping from Hydroponics Blanes.