Inline Extractor Fan 125 (195 m3/h) Duct

Indoor Growing - Inline Extractor 125 (195 M3/h.) TUBE

The Inline Extractor 125 (195 M3/h.) TUBE in tubular format is designed to introduce or extract air in grow tents and small rooms, as well as to support long duct runs where the main extractor loses performance.

The lightweight plastic housing makes it easy to anchor inside the Ø125 mm duct itself and the impeller provides a stable flow with a sound level ≈39 dB, ideal when acoustic discretion is required.

The motor operates around 2400 rpm with a consumption of 16 W, providing constant ventilation without skyrocketing energy costs. The nominal flow rate of 195 m³/h is suitable for fresh air supply, localized extraction of heat sources, or as additional push in lines with several bends. Technical note: tube-type inline extractors do not provide enough pressure to operate with carbon filters and perform best in runs shorter than 2 meters.

Compact dimensions (123 × 118 mm), weight 0.43 kg and max amperage 0.1 A complete a simple, efficient and very versatile unit.

At Hydroponics Blanes, Grow Shop in Spain, it is possible to integrate this model with grilles, clamps and other cannabis growing accessories, with discreet shipping and advice for projects with cheap indoor grow tents.

Indoor Growing Inline Extractor 125 (195 M3/h.) TUBE

In indoor growing air renewal prevents hot spots, helps control humidity and improves CO₂ exchange. Inline Extractor 125 (195 M3/h.) TUBE is especially useful as a direct fresh air supply, as extraction reinforcement in long runs and to evacuate heat from specific areas of the tent.

What is the Inline Extractor 125 (195 M3/h.) TUBE for?

• Fresh air injection to balance pressure and reduce accumulated humidity.
• Support for the main extractor in lines with losses due to bends or long lengths.
• Localized evacuation of heat next to lights or cooltube type reflectors.
• Directed circulation in dead zones that require constant movement.

Indoor growing accessory Inline Extractor 125 (195 M3/h.) TUBE

Among cannabis growing accessories, this extractor stands out for immediate installation in 125 mm duct, low noise and low consumption. It fits domestic projects and rooms where you want to modulate the flow without complicating the installation, maintaining a homogeneous environment with the help of controllers and timers.

What is the Inline Extractor 125 (195 M3/h.) TUBE used for?

It is used to introduce filtered outside air (without activated carbon), to support extraction when the line exceeds the ideal length, to move air in small greenhouses or mother rooms, and for continuous circulation tasks that promote uniform drying and stronger plants.

How to use Inline Extractor 125 (195 M3/h.) TUBE

1. Define the function: supply, extraction support or spot evacuation.
2. Plan a run of ≤ 2 m to maintain 195 m³/h without pressure drops.
3. Insert the extractor body into the Ø125 mm tube following the flow arrow.
4. Secure with clamps and seal joints with aluminum tape to prevent leaks.
5. Make the electrical connection in a two-pole terminal (cable not included); comply with current regulations.
6. Check flow with hand or anemometer and direct outlets to sweep dead zones.
7. Periodically check for vibrations, cable condition and grille cleanliness.

Advantages of using Inline Extractor 125 (195 M3/h.) TUBE

• Quiet and efficient: ≈39 dB and 16 W consumption.
• Compact format: 123 × 118 mm and 0.43 kg, easy to hide.
• Direct installation in 125 mm flexible duct.
• Real versatility: supply, support and spot evacuation in short runs.
• Compatibility with grilles, sleeves and standard ventilation accessories.

Where to buy an Inline Extractor 125 (195 M3/h.) TUBE online?

Available at Hydroponics Blanes, trusted Grow Shop with discreet shipping. Complete catalog of indoor growing, ducts, grilles, controllers and cheap indoor grow tents. Secure purchase at Grow Shop in Spain with support to size ventilation according to tent size and lighting power.

Technical features: Max flow 195 m³/h • Mouth diameter 125 mm • Speed ≈2400 rpm • Consumption 16 W • Max amperage 0.1 A • Sound level ≈39 dB • Dimensions 123 × 118 mm • Weight 0.43 kg. Technical recommendation: do not use with carbon filters and keep runs below 2 m to preserve performance.

The Inline Extractor 125 (195 M3/h.) TUBE provides constant flow where it is most needed, with simple installation and minimal consumption. Perfect for introducing fresh air, reinforcing demanding runs and maintaining a stable microclimate.

At Hydroponics Blanes there is stock, expert advice and discreet shipping to speed up any indoor ventilation project.