Inline Extractor Fan 100 (137 m3/h) Duct

Indoor cultivation - Inline extractor 100 (137 M3/h.) TUBE

The Inline extractor 100 (137 M3/h.) TUBE from Blauberg is a lightweight and efficient solution for moving air in indoor installations where short duct runs are required. The unit fits inside a standard Ø100 mm flexible duct, allowing the equipment to be placed exactly where needed: bringing in fresh air from outside, assisting the main extraction in long lines, or removing heat from a cooltube.

This inline format stands out for its quiet operation (≈38 dB) and low power consumption of 16 W, with a rotation speed of ≈2300 rpm. The nominal flow rate of 137 m³/h covers supply or support needs in compact grow tents, always in runs shorter than 2 meters.

It should be remembered that tube-type inline extractors do not generate the pressure needed to work with carbon filters; the recommended application is air supply or spot extraction from a cooltube.

Useful integration data: inlet diameter 100 mm, outlet 98 mm, current 0.085 A, weight 0.4 kg, dimensions 115 × 98 mm. Electrical connection is made via a two-pole terminal (cable not included), so installation must comply with current regulations.

Available at Hydroponics Blanes, Grow Shop in Spain, with advice for choosing cannabis cultivation accessories, ducts and cheap indoor grow tents, as well as discreet shipping throughout the territory.

Indoor Cultivation Inline extractor 100 (137 M3/h.) TUBE

In indoor cultivation it is key to renew air to stabilize temperature, humidity, and CO₂ levels. The Inline extractor 100 (137 M3/h.) TUBE provides effective support for fresh air intake and localized extraction, helping to avoid hot spots near lights or areas with poor circulation.

What is the Inline extractor 100 (137 M3/h.) TUBE for?

• Fresh air supply: direct injection into the tent to balance pressure and RH.
• Extraction support: reinforcement in long runs where the main extractor loses flow.
• Cooltube evacuation: removal of heat generated by the cooled reflector.
• Directed circulation: air movement in dead zones of the enclosure.

Indoor cultivation accessory Inline extractor 100 (137 M3/h.) TUBE

As part of the cannabis cultivation accessories, this inline extractor stands out for its compact format, low consumption, and ease of installation in flexible duct. Compatibility with 100 mm allows it to be combined with standard grilles, sleeves, and clamps, integrating into projects with cheap indoor grow tents or in rooms where occasional support is needed without significantly increasing noise levels.

What is the Inline extractor 100 (137 M3/h.) TUBE used for?

It is mainly used to introduce filtered outside air (without activated carbon), maintain a slight positive pressure to help renew the environment, assist lines with several bends or lengths above ideal, and extract heat from dedicated cooltubes. It is also useful in small greenhouses and in enclosures where controlled circulation with minimal power consumption is needed.

How to use Inline extractor 100 (137 M3/h.) TUBE

1) Define objective: supply, extraction support, or cooltube evacuation.
2) Plan a run of ≤ 2 m to maintain performance and avoid pressure loss.
3) Insert the extractor body inside the Ø100 mm flexible duct, respecting the flow arrow.
4) Secure with clamps and seal joints with aluminum tape to prevent leaks.
5) Make the electrical connection at the two-pole terminal (without ground), complying with regulations.
6) Check flow with hand or anemometer and adjust orientation to direct the flow where needed.
7) Keep grilles free of dust; periodically check for possible vibrations or looseness.

Advantages of using Inline extractor 100 (137 M3/h.) TUBE

• Quiet and efficient: ≈38 dB and 16 W consumption.
• Immediate installation: direct integration into 100 mm flexible duct.
• Small size: 115 × 98 mm and 0.4 kg make it easy to place in tight spaces.
• Real versatility: air supply, extraction support, and cooltube evacuation in short runs.
• Low cost: economical solution to improve circulation where it is most needed.

Where to buy an Inline extractor 100 (137 M3/h.) TUBE online?

Available at Hydroponics Blanes, trusted Grow Shop with discreet shipping. Complete catalog of indoor cultivation, ducts, grilles, controllers, and cheap indoor grow tents. Secure purchase at Grow Shop in Spain with advice to size ventilation according to lighting power, tent size, and renewal needs.

Indicative specifications: Nominal flow 137 m³/h • Inlet diameter 100 mm • Outlet diameter 98 mm • Speed ≈2300 rpm • Power 16 W • Current 0.085 A • Sound level ≈38 dB • Dimensions 115 × 98 mm • Weight 0.4 kg. Technical note: the tube-type inline format is not suitable for use with a carbon filter; use is recommended in short runs (≤ 2 m) for supply or specific extraction.

The Inline extractor 100 (137 M3/h.) TUBE is a practical tool to improve circulation without complications, bringing in fresh air or relieving demanding lines with little noise and low consumption. Simple integration into standard ducts and immediate availability at Hydroponics Blanes allow you to set up efficient systems with technical support and discreet shipping to any destination.