


SALE PROHIBITED TO PERSONS UNDER 18 - FREE SHIPPING FROM €40 (Mainland Spain only - Max. 25 Kg)
Extractor Centro 200 Max Blauberg 930 M3/h provides a robust and stable airflow for Indoor cultivation. With a 200 mm outlet, centrifugal rotor, and low noise level, it keeps temperature, humidity, and odors under control in demanding grow tents and rooms.

The Extractor Centro 200 Max Blauberg 930 M3/h is aimed at ventilation installations that require useful duct pressure and direct compatibility with a 200 mm carbon filter.
The ABS plastic housing resists ambient humidity and facilitates firm mounting on a wall, ceiling, or cabinet structure. The unit features a single-phase motor with overload protection and automatic restart, coupled to a ball centrifugal rotor with backward-curved blades to efficiently move air even with bends, silencers, and long duct runs. Key performance: 930 m³/h airflow, 173 W power, 0.76 A current, around 48 dB sound level, and ≈2125 RPM.
Compact dimensions 276 × 340 mm, weight 3 kg, and IPX4 protection against splashes; operating range of -25 ºC to +55 ºC for stable year-round operation.
It is advisable to combine with a potentiometer or fan-controller to adjust extraction according to season, light power, and cycle phase. Available at Hydroponics Blanes, Grow Shop in Spain, with discreet shipping and expert advice on cannabis cultivation accessories and cheap indoor grow tents.
In indoor cultivation projects, it is essential to renew air to stabilize temperature, reduce excessive humidity, replenish CO₂, and manage odors. Extractor Centro 200 Max Blauberg 930 M3/h performs especially well in large tents or compact rooms with a carbon filter, ensuring sustained flow and a homogeneous microclimate.
• Stale air evacuation: removal of heat, humidity, and aromatic compounds.
• Climate stability: maintaining target ranges of RH and temperature.
• Effective gas exchange: improved transpiration and nutrient uptake.
• Integration with filtration: direct coupling to 200 mm carbon filter for odor control.
This model stands out among cannabis cultivation accessories for its balance between airflow and static pressure. The centrifugal design with backward-facing blades maintains performance with moderate pressure losses, while the ABS housing helps dampen vibrations. Installation is possible inside or outside the tent, with easy connection to flexible or rigid ducts.
It is used as the main extractor in large tents (e.g., 120×240 or 150×150 cm, depending on heat load) and in small rooms where a flow capable of overcoming filter and bend restrictions is needed.
It is also useful in drying rooms and propagation areas to avoid nighttime humidity spikes and hot spots during the photoperiod.
1) Calculate required airflow: room volume (m³) × air changes/h (e.g., 30–60).
2) Place the extractor at the top to remove accumulated hot air.
3) Connect to duct and 200 mm carbon filter with clamps; minimize bends and long runs.
4) Seal joints with aluminum tape to prevent odor leaks and pressure loss.
5) Add a certified fan-controller or potentiometer for fine adjustment of airflow.
6) Check draft with hand or anemometer; periodically check fixings, vibrations, and filter condition.
7) Keep ducts clean to maintain 930 m³/h and stable noise level.
• 930 m³/h airflow with sufficient useful pressure for circuits with filter and silencer.
• Sound level ≈48 dB in well-dampened installations.
• Single-phase motor with overload protection and automatic restart.
• Rated power 173 W and current 0.76 A for solid performance.
• Wide thermal range (-25 ºC to +55 ºC) and IPX4 against splashes.
• Dimensions 276 × 340 mm and weight 3 kg for easy installation and maintenance.
Available at Hydroponics Blanes, trusted Grow Shop with discreet shipping. Complete catalog of indoor cultivation, carbon filters, controllers, and cheap indoor grow tents. Secure purchase at Grow Shop in Spain with technical support to size extraction according to LED power, duct length, and pressure losses.
Technical specifications: Mouth diameter: 200 mm • Airflow: 930 m³/h • Power supply: 230 V / 50 Hz • Power: 173 W • Current: 0.76 A • Speed: ≈2125 RPM • Sound level: 48 dB • Operating temperature: -25 ºC to +55 ºC • Dimensions: 276 × 340 mm • Weight: 3 kg • Protection: IPX4.
The Extractor Centro 200 Max Blauberg 930 M3/h offers a powerful and versatile solution for indoor air renewal, with easy integration to standard filters and ducts. Consistent performance, clear installation, and broad compatibility to stabilize the microclimate.
Available at Hydroponics Blanes with discreet shipping and specialized support in selecting cannabis cultivation accessories and configuring systems for different tent or room sizes.
Customers who bought this product also bought: