Blauberg Centro 150 Extractor Fan 460 m3/h

Extractor Centro 150 Blauberg 460 M3/h Price for Indoor Growing

The Extractor Centro 150 Blauberg 460 M3/h is designed for indoor installations that require reliable extraction and useful duct pressure. The ABS plastic housing resists moisture and impacts, while the centrifugal assembly with backward-curved blades delivers a stable flow capable of overcoming losses from bends, ducts, and filtration.

The single-phase motor features overload protection and automatic restart for prolonged operation. With a nominal consumption of 80 W, current of 0.35 A, and speed of ≈2725 RPM, the fan offers a balance between performance and efficiency.

Compatible with 150 mm carbon filters and 160 mm adapters, for both internal and external cabinet installations. Approximate noise level of 46 dB, compact dimensions 286 × 300 mm, weight of 2.45 kg, and IPX4 protection against splashes. The operating range of -25 ºC to +55 ºC allows stable operation throughout the year.

It is advisable to use a potentiometer or fan-controller to adjust extraction according to season, light power, and cycle phase.

Available at Hydroponics Blanes, Grow Shop in Spain, with discreet shipping, expert advice, and a wide catalog of cannabis growing accessories and cheap indoor grow tents.

Indoor Growing Extractor Centro 150 Blauberg 460 M3/h

In indoor growing projects, proper ventilation controls temperature, humidity, and CO₂ renewal. Extractor Centro 150 Blauberg 460 M3/h performs especially well in medium/large tents or compact rooms, maintaining a homogeneous microclimate and helping with odor management when integrated with a carbon filter of the same diameter.

What is the Extractor Centro 150 Blauberg 460 M3/h for?

• Stale air evacuation: heat, humidity, and aromatic compounds are removed from the enclosure.
• Microenvironment stability: helps maintain target ranges of RH and temperature.
• Efficient gas exchange: improves transpiration and nutrient assimilation.
• Integration with filtration: direct connection to 150 mm carbon filter for odor control.

Indoor Growing Accessory Extractor Centro 150 Blauberg 460 M3/h

Among the essential cannabis growing accessories, this model stands out for its good compromise between flow and pressure. The centrifugal rotor with backward blades minimizes losses due to restriction and maintains stable flow even with silencers or demanding duct runs. Easy installation with clamps, possibility to dampen vibrations, and compatibility with standard climate controllers.

What is the Extractor Centro 150 Blauberg 460 M3/h used for?

It is used as the main extractor in 120×120 or 150×150 cm tents (depending on heat load and duct length), as well as in small rooms with moderate duct runs. It is also useful in drying rooms, propagation areas, and setups where nighttime humidity control and thermal peaks are critical.

How to use Extractor Centro 150 Blauberg 460 M3/h

1) Calculate airflow requirement: enclosure volume (m³) × air changes/hour (e.g., 30–60).
2) Install at the top of the tent or room to extract accumulated hot air.
3) Connect to duct and 150 mm carbon filter (adapt to 160 mm when applicable).
4) Minimize bends and excessive runs; seal joints with aluminum tape and clamps to prevent leaks.
5) Add fan-controller or certified potentiometer if fine adjustment of flow is needed.
6) Check draft with hand or anemometer; periodically check fixings, vibrations, and filter condition.
7) Keep ducts clean to maintain 460 m³/h and low noise level.

Advantages of using Extractor Centro 150 Blauberg 460 M3/h

• 460 m³/h flow with good useful pressure for circuits with filter and bends.
• Noise level ≈46 dB in well-dampened installations.
• Single-phase motor with overload protection and automatic restart.
• Moderate consumption of 80 W and current of 0.35 A.
• Wide thermal range (-25 ºC to +55 ºC) and IPX4 against splashes.
• Compact dimensions 286 × 300 mm and weight of 2.45 kg for easy installation.
• Compatibility with cheap indoor grow tents and compact rooms.

Where to buy Extractor Centro 150 Blauberg 460 M3/h online?

Available at Hydroponics Blanes, trusted Grow Shop with discreet shipping. Complete catalog of indoor growing, filters, controllers, and cheap indoor grow tents, with technical support to size extraction according to LED power, duct length, and pressure losses. Secure purchase at Grow Shop in Spain; shipping throughout Spain in 24/48 h and a 5% discount code for your next order.

Technical specifications: Inlet diameter: 150–160 mm • Flow: 460 m³/h • Power supply: 230 V / 50 Hz • Power: 80 W • Current: 0.35 A • Operating temperature: -25 ºC to +55 ºC • Speed: ≈2725 RPM • Noise level: 46 dB • Dimensions: 286 × 300 mm • Weight: 2.45 kg • Protection: IPX4.

The Extractor Centro 150 Blauberg 460 M3/h provides the necessary flow to maintain a controlled indoor climate, integrating with standard filters and ducts without complications. Balanced solution for air renewal, humidity stabilization, and odor management in tents and rooms, available at Hydroponics Blanes with discreet shipping and specialized support for every phase of the project.