3 x 1.5 mm Cable Coil

Buy 3 x 1.5 mm Cable Coil for indoor growing installations

The reference “100 m coil of 3 x 1.5 mm cable” describes a classic for indoor electrical installation: continuous length without unnecessary splices and a 1.5 mm² section suitable for auxiliary lines and branches to power strips, timers and monitoring equipment.

The 3 x 1.5 format integrates three wires that allow you to distribute phase, neutral and ground following common identification criteria in trunking, cable trays or conduits. This 100 m roll presentation streamlines the job: cut each section to size, label by circuits (light, air, water, control) and leave spare capacity for future expansions, keeping the installation clear and scalable.

Within the ecosystem of indoor growing accessories and tools, 3 x 1.5 mm Cable Coil is combined with multi-socket bases, watertight connectors, terminal blocks, and circuit breakers and RCDs to build clean electrical rings and enable quick diagnostics.

Ergonomics improves by routing the cabling along the perimeters and sides of the tent, raising routes and avoiding crossings in walk-through areas.

Within the Hydroponics Blanes catalog —a trusted Grow Shop and benchmark Grow Shop in Spain— this cable fits into lighting kits, extraction systems and compact panels with discreet shipping to Spain, Portugal, Germany, France and Italy. With each order, a 5% discount code is sent by email, useful to complete your purchase with more cannabis growing accessories.

Indoor Growing Accessories 3 x 1.5 mm Cable Coil

The 3 x 1.5 mm Cable Coil provides continuous length and visual order. The 1.5 mm² section is ideal for branches to LED luminaires, oscillating fans, environmental controllers, relays and sensors. The outer sheath allows routing through trunking and gentle bends, maintaining correct radii and clear access for maintenance.

What is the 3 x 1.5 mm Cable Coil used for?

• Powering LED luminaires, extractor fans, fans and controllers from a main panel or power strip.
• Creating tidy branches to multi-socket bases and side outlets in indoor growing tents.
• Separating circuits by blocks (light, air, water, control) for quick diagnostics.
• Minimizing splices, hot spots and voltage drops in medium runs.
• Labeling sections and leaving spare capacity for expansions of the electrical system.

What is the 3 x 1.5 mm Cable Coil?

It is a 100 m coil of cable with three conductors of 1.5 mm², designed for general-purpose indoor electrical runs. The continuous length allows custom cuts, clean routes in trays and trunking, and color organization under common standards. The roll presentation makes transport, storage and deployment easier, without knots or significant deformations.

How to use the 3 x 1.5 mm Cable Coil?

1. Plan the layout: define elevated, ventilated routes and separate functional blocks (lighting, ventilation, irrigation, control).
2. Measure runs and cut sections of the 3 x 1.5 mm Cable Coil, leaving slack for bends and connections.
3. Route through trunking or cable trays; secure with cable ties and supports, avoiding forced bending radii.
4. Connect in panel, power strips or sockets using suitable terminal blocks and connectors; check tightening with calibrated tools.
5. Identify both ends with labels (circuit and function) and document the route in a simple diagram.
6. Before applying load, check continuity and insulation; energize in stages and measure consumption per line.
7. Add protection devices (MCB/RCD) and set timers according to photoperiod and extraction.

Technical tip: maintain separation between power and signal lines to avoid interference; keep branches away from heat sources and damp areas; periodically check tightening during long work sessions.

Where to buy a 3 x 1.5 mm Cable Coil online?

Available at Hydroponics Blanes, a Grow Shop in Spain catalog with discreet shipping to Spain, Portugal, Germany, France and Italy. In addition to the 3 x 1.5 mm Cable Coil, the store offers grow tents, lighting kits, pots, trays, stakes, ventilation systems and numerous indoor growing accessories and tools to complete installations with professional standards.

The 3 x 1.5 mm Cable Coil provides continuous length, organization and efficiency.

The 100 m roll allows you to size circuits, label by zones and maintain clean routes without unnecessary splices, an approach aligned with the proposal of Hydroponics Blanes, a trusted Grow Shop, and a catalog designed to assemble, maintain and expand indoor growing projects with the best logistics and support.