



SALE PROHIBITED TO PERSONS UNDER 18 - FREE SHIPPING FROM €40 (Mainland Spain only - Max. 25 Kg)
TEMPOBOX 6 x 600 W Timer With Heater Socket concentrates the control of six luminaires in a single robust module for indoor cultivation. The auxiliary socket for heater helps stabilize the nighttime climate, while the analog programming of 15 minutes ensures consistent photoperiods in indoor cultivation installations.

The TBOX series is designed for rooms and cabinets that require electrical order, repeatability, and climate control consistent with the light cycle.
The TBOX 6H model controls lighting configurations in blocks of six 600 W fixtures (or other equivalent formats) and adds a 2,400 W heater socket intended to maintain a stable temperature during the dark phase.
The heart of the system is an analog timer with a minimum interval of 15 minutes and a 48 h power reserve, which preserves programming in the event of micro-outages.
The compact chassis of 241 x 180 x 95 mm makes it easy to mount on a technical panel, rack, or wall, and the standard 230 Vac / 50 Hz power supply ensures compatibility with European panels.
Each line supports a maximum power of 2,520 W per line, which simplifies load distribution and reduces start-up peaks from ballasts or drivers. The IP20 protection rating protects against accidental contact in dry areas of the room.
Integrated with grow controllers (thermostats, hygrostats, CO₂ controllers) and with indoor electrical accessories (contactors, circuit breakers, residual-current devices), the system creates a reliable ecosystem that improves PPFD uniformity, thermal stability, and work planning in cannabis cultivation.
All this contributes to a clean transition to flowering and a predictable environment for cannabis plants, both in large cabinets and modular rooms, with support and supply from Hydroponics Blanes, trusted Grow Shop in the Spanish market.
TEMPOBOX Timer 6 x 600 W With Heater Socket synchronizes six light points under a single clock and allows a controlled heat supply to be coupled during the night. Coordinated switching reduces sharp fluctuations in temperature and humidity, promotes a uniform canopy, and facilitates pruning, watering, and ventilation tasks within indoor cultivation. The auxiliary heater socket helps prevent condensation, mold, and metabolic slowdowns during cold periods.
It is used to automate the switching on and off of up to six 600 W luminaires in 15-minute steps, maintain the program with a 48 h reserve, and power a 2,400 W heater during the dark phase. This combination stabilizes the microclimate and ensures 18/6 or 12/12 photoperiods without deviations, key objectives in indoor cultivation installations focused on performance and consistency.
As a core tool of the panel, it centralizes outputs, organizes wiring, and simplifies audits and maintenance. Key specifications: Dimensions 241 x 180 x 95 mm · 230 Vac / 50 Hz · maximum power 2,520 W per line · auxiliary heater socket 2,400 W · analog timer 15 min · 48 h power reserve · IP20. Integration with other grow controllers allows the system to be scaled without losing order, safety, or traceability in the room.
1) Fix the chassis on a firm and ventilated surface, respecting IP20 and keeping it away from splashes.
2) Connect the power supply to 230 Vac / 50 Hz with properly rated circuit breaker and residual-current protection.
3) Distribute the six luminaires by lines, respecting 2,520 W per line and the recommended cable section.
4) Program the analog timer in 15-minute blocks for 18/6 (vegetative) or 12/12 (flowering) cycles.
5) Connect the heater to the auxiliary socket 2,400 W and adjust its thermostat to maintain the target temperature during the dark period.
6) Label lines, document schedules, and organize cable bundles for quick diagnostics.
7) Perform a 24-hour test to verify switching and thermal stability before operating at full capacity.
The investment pays off with the reduction of loose modules, less setup time, and fewer incidents due to desynchronization or temperature drops. There are packs and promotions at Hydroponics Blanes, trusted Grow Shop with a specialized catalog of grow controllers and indoor electrical accessories for all phases of the project.
Available at Hydroponics Blanes, Grow Shop in Spain with discreet shipping. The online grow shop offers technical advice for sizing loads, choosing wiring, combining reflectors, ballasts, and ventilation, and achieving balanced integration within indoor cultivation installations of different sizes.
Key technical features: Dimensions 241 x 180 x 95 mm · 230 Vac / 50 Hz · maximum power 2,520 W per line · auxiliary heater socket 2,400 W · analog timer with minimum interval 15 minutes · 48 h power reserve · IP20 protection. This set makes the TEMPOBOX Timer 6 x 600 W With Heater Socket the operational core for lighting and thermal support in intensive cannabis cultivation environments.
For those seeking centralized control and stable climate, the TEMPOBOX Timer 6 x 600 W With Heater Socket offers synchronization of six fixtures and thermal support from a single unit.
Programming in 15-minute intervals, 48 h reserve, and distribution of 2,520 W per line facilitate consistent results in indoor cultivation of cannabis plants, with direct purchase at Hydroponics Blanes, Grow Shop in Spain that maintains discreet shipping and expert support in the online grow shop.