Ignator HeroLED T720W Pro 3.1ppe

Ignator HeroLED T720W Pro 3.1PPE Cheap

Designed for indoor cultivation installations that require powerful, efficient, and homogeneous lighting, the Ignator HeroLED T720W Pro 3.1PPE combines state-of-the-art horticultural LED technology with a robust aluminum structure and a passive thermal dissipation system.

This luminaire integrates 2592 Sanan white diodes and 144 Sanan 660 nm red diodes, strategically distributed to provide balanced photosynthetic radiation.

The incorporation of two integrated 360W electronic drivers allows for a combined nominal power of 720W, while the 180-degree foldable design facilitates transport, storage, and assembly.

With an estimated lifespan of 50,000 hours, intensity regulation, and compatibility with external controllers, it represents an advanced alternative for those looking to improve the use of electrical energy in indoor horticulture installations.

What is Ignator HeroLED T720W Pro 3.1PPE?

The Ignator HeroLED T720W Pro is a 720W professional horticultural LED luminaire developed to provide photosynthetic lighting during the different stages of plant development. It belongs to the HeroLED range from Ignator and stands out for incorporating a high number of LED diodes, an optimized spectrum, and a photonic efficacy of 3.1 µmol/J.

PPE technology, called photosynthetic photon efficacy, expresses the number of photons useful for photosynthesis that a luminaire generates per joule of electrical energy consumed. In this model, the ratio of 3.1 µmol/J allows for a photosynthetic photon flux (PPF) of 2232 µmol/s, according to the manufacturer's specifications.

The 720W LED grow panel uses a structure of six independent bars that distribute the lighting over a wide surface. This configuration helps reduce excessive light concentrations at specific points and promotes balanced coverage of the plant canopy.

Another distinguishing feature is the gray finish, combined with aluminum profiles that help dissipate the heat generated by the electronic components. Cooling does not require fans, allowing for silent operation and reducing mechanical maintenance.

The equipment incorporates IP54 protection, integrated intensity regulation, and compatibility with external control systems via 0-10V signal, features that are especially interesting for professional installations that need to adjust different lighting parameters.

What is Ignator HeroLED T720W Pro 3.1PPE used for?

The Ignator HeroLED 720W 3.1 PPE is used to provide photosynthetically active radiation to plants grown indoors, where artificial lighting replaces or complements sunlight. It is designed for horticultural projects that need to control light intensity and maintain stable conditions during the plant development cycle.

The combination of full-spectrum white light and deep red 660 nm allows the luminaire to be used both during vegetative growth and in the reproductive stages of horticultural and ornamental species. Red radiation plays an important role in photosynthetic processes and in certain plant development responses.

Among the main advantages of the 720W professional horticultural LED are:

• High energy efficiency: 3.1 µmol/J to convert electrical energy into photosynthetically useful radiation.
• Nominal power of 720W: intense lighting for indoor installations with high light demand.
• 2736 Sanan LED diodes: distribution of numerous emission points over the six bars.
• Full spectrum: combination of white light and 660 nm red diodes.
• Passive cooling: thermal dissipation through aluminum profiles, without fans.
• 180° foldable design: facilitates transport, handling, and installation tasks.
• Power regulation: allows adapting light intensity to different needs.
• External 0-10V control: compatible with installations of up to 80 luminaires connected in series.
• Estimated lifespan of 50,000 hours: designed for prolonged operation.
• IP54 protection: resistance to dust and splashes within the classification limits.

This LED grow system also allows better use of the available vertical space thanks to a profile of just 47.5 mm thick. The distribution of the diodes helps provide more uniform lighting than that obtained with compact sources concentrated at a single point.

How to use Ignator HeroLED T720W Pro 3.1PPE?

To correctly use the Ignator HeroLED T720W Pro 3.1PPE, it is necessary to install the luminaire on a suitable suspension structure, check the electrical supply, and select the light intensity according to the needs of the plants.

The manufacturer recommends maintaining a minimum installation distance of 45 cm above the top of the plant canopy. This separation is an initial reference, although the final distance and working power should be adjusted considering the received radiation, the cultivated species, and environmental conditions.

The equipment incorporates a potentiometer that allows direct intensity regulation. In installations with several units, it is also possible to use a compatible external controller with 0-10V signal to centrally manage different luminaires.

The lighting should be programmed using a photoperiod appropriate for each species and cultivation stage. To determine the proper intensity, it is advisable to use a PAR meter to know the PPFD values on the plant surface.

During operation, it is advisable to regularly check the temperature of the space, maintain adequate ventilation, and prevent flammable materials from coming into contact with the luminaire. Although the system has passive cooling, the electronic components generate heat during operation.

Buy Ignator HeroLED T720W Pro 3.1PPE

If you need to buy Ignator HeroLED T720W Pro, at Hydroponics Blanes you will find a luminaire aimed at improving the efficiency of horticultural lighting installations. The combination of power, regulation, and light distribution makes this model an interesting option to renew old equipment or set up new indoor cultivation spaces.

The 720W full spectrum LED panel stands out especially for the balance between the number of emitted photons and electrical consumption. The six-bar technology allows for distributed lighting, while the deep red diodes complement the white spectrum to offer a spectral distribution adapted to different plant phases.

Below, you can consult the main technical specifications:

• Brand: Ignator.
• Model: HeroLED T720W Pro 3.1PPE.
• Power: 720W.
• PPE efficiency: 3.1 µmol/J.
• PPF photosynthetic flux: 2232 µmol/s.
• Number of bars: 6.
• Total number of diodes: 2736.
• White diodes: 2592 Sanan.
• Red diodes: 144 Sanan 660 nm.
• Spectrum: full, reinforced in red.
• Electronic drivers: 2 integrated 360W. __ETS_NL