Twin Controller Humidity Control 24a Cli-Mate

Twin Controller Humidity Control 24a Cli-Mate Air Inlet and Outlet Management

The Twin Controller Humidity Control 24a Cli-Mate integrates thermal and humidity control for grow tents and ventilation rooms. The front panel offers MIN speed FAN 1 and MIN speed FAN 2 controls to set independent minimums for intake and extraction; a Negative Pressure adjustment balances airflow and creates constant negative pressure to prevent odor leaks; in addition, a Humidity control helps smooth out rH peaks.

When setting a temperature value, the electronics operate in a 100% automatic way, modulating revolutions until reaching the setpoint with smooth transitions.

The algorithm works with automatic hysteresis of 2 °C and 10% rH and a 1 °C step differential to prevent abrupt changes, reducing noise and vibrations.

Includes dual temperature and humidity sensor for real environment reading, which should be placed at canopy height. Total electrical capacity 24 A (12+12), thermal range 5–55 °C, humidity range 20–100% rH, power supply 220/230 V 50 Hz, housing IP44 and compact format 140 × 220 × 110 mm.

Quick installation using included rear plate. Ideal for lines with carbon filters, soundproof ducts and silencers, ensuring homogeneous climate and discretion.

Available at Hydroponics Blanes, Grow Shop in Spain, within cannabis cultivation accessories and setups with cheap indoor grow tents, with specialized advice and discreet shipping.

Indoor Growing Twin Controller Humidity Control 24a Cli-Mate

Well-coordinated ventilation determines plant performance and health. With Twin Controller Humidity Control 24a Cli-Mate it is easy to stabilize temperature after turning on lights, keep rH within the target range and ensure negative pressure for maximum aromatic discretion.

What is the Twin Controller Humidity Control 24a Cli-Mate for?

It is used to control temperature, humidity and airflow with two independent channels and adjustable rpm minimums. It maintains continuous renewal, prevents oscillations, reduces noise from abrupt changes and optimizes the balance between intake and extraction in indoor growing.

Indoor growing accessory Twin Controller Humidity Control 24a Cli-Mate

Within cannabis cultivation accessories, this controller stands out for its 24 A (12+12) capacity, combined Tº/rH reading and ease of use. Fits with carbon filters, Sonoconnect-type tubes and silencers, creating efficient air lines for professional tents and rooms.

When to install Twin Controller Humidity Control 24a Cli-Mate?

Recommended when rH rises during nighttime periods, when increasing airflow due to new LED lights, if marked differences appear between day and night, when it is necessary to reinforce negative pressure or when migrating from manual control to stable climate automation.

How to use Twin Controller Humidity Control 24a Cli-Mate

1) Fix the controller on a stable surface with the rear plate (IP44 suitable for humid environments).
2) Connect intake fan to FAN 1 and extractor to FAN 2 (up to 12 A per channel; total 24 A).
3) Place the dual sensor at canopy height, away from direct drafts and lights.
4) Set target temperature; the system will start automatic control with 2 °C hysteresis.
5) Adjust MIN speed FAN 1 and MIN speed FAN 2 to ensure permanent minimum renewal.
6) Regulate Negative Pressure until achieving slight depression (extractor equal to or above intake).
7) Fine-tune Humidity according to the cultivation phase; check stability after 10–15 minutes.
8) Record readings and readjust with seasonal changes or when modifying light power.

Advantages of using Twin Controller Humidity Control 24a Cli-Mate

• Comprehensive management of temperature, rH and ventilation with two independent channels.
• Stable negative pressure for effective carbon filter operation and maximum discretion.
• Automatic hysteresis (2 °C / 10% rH) and 1 °C steps that prevent swings.
• 24 A (12+12) for high-flow fans in rooms and tents.
• Compact format 140 × 220 × 110 mm and IP44 protection.
• Buy at Hydroponics Blanes, trusted Grow Shop with discreet shipping.

Where to buy a Twin Controller Humidity Control 24a Cli-Mate online?

At Hydroponics Blanes you can purchase Twin Controller Humidity Control 24a Cli-Mate with updated stock and expert support. Catalog of cheap indoor grow tents, ventilation, climate control and cannabis cultivation accessories in a single Grow Shop in Spain.

Precise climate automation with Twin Controller Humidity Control 24a Cli-Mate: balance between intake and extraction, controlled rH and stable temperature for a productive and quiet environment. Available online at Hydroponics Blanes with technical advice and discreet shipping nationwide.