Cable extension 16 + touch spot (TSS-2) Trolmaster

Online Price Cable extension 16 + touch spot (TSS-2) Trolmaster

The Cable extension 16 + touch spot (TSS-2) Trolmaster is a specific accessory for expanding water detection installations linked to the TrolMaster system.

The cable features a male end and a female end, a configuration that allows you to extend the distance between two detection points or increase the separation between the WD-1 Water Detector module and the corresponding sensor.

The official length is 16 ft, approximately equivalent to 4.88 meters, providing greater freedom to distribute sensors in rooms, irrigation areas, tanks, and areas where there is a risk of leaks or water accumulation.

The Plug & Play format makes installation easy without complex configurations and maintains a direct connection with compatible components.

TrolMaster specifies an operating environmental range of approximately 0 to 50 °C and a relative humidity of up to 90%.

Among the Trolmaster accessories, the TSS-2 is especially useful when the design of an authorized or licensed installation requires placing detection points far from the controller.

At Hydroponics Blanes you can find this cable along with other INDOOR GROW ACCESSORIES intended for automation, monitoring, irrigation, and technical control.

Buy Cable extension 16 + touch spot (TSS-2) Trolmaster

Buying the Cable extension 16 + touch spot (TSS-2) Trolmaster allows you to easily extend the range of WD-1 water detectors when the available length in the installation does not allow you to place the sensors at the desired points.

In an authorized indoor grow installation, early leak detection can be especially important around tanks, irrigation systems, pipelines, pumps, and other areas where water circulates. Being able to properly distribute the sensors helps cover distant points without having to modify the entire system configuration.

The TSS-2 has an approximate length of 4.88 meters. This additional distance allows you to separate two sensors or extend the existing run between the WD-1 module and the detection point. The male/female connection makes it easy to integrate the extension directly into the compatible system.

The manufacturer defines the product as a Plug & Play solution, so the installation is designed to be done via direct connection. It does not require independent programming, additional power supply, or specific configuration for the cable itself.

Before buying, it is advisable to check that the connected component corresponds to the compatible TrolMaster system. The TSS-2 is specifically intended for the WD-1 water detector and should not be confused with other extension cables from the brand intended for sensor boards, environmental probes, or different accessories.

In our online grow shop you can find different Trolmaster accessories to expand and adapt professional control systems. Choosing each cable according to the exact reference helps avoid incompatibilities and facilitates an organized installation.

Advantages of using Cable extension 16 + touch spot (TSS-2) Trolmaster

One of the main advantages of the Cable extension 16 + touch spot (TSS-2) Trolmaster is the ability to increase the reach of the detection system without moving the controller or modifying the main distribution of an installation.

The 16 feet of length provide approximately 4.88 additional meters, a useful distance to reach areas where it is convenient to place a detection point. This allows greater freedom in planning the position of sensors around tanks, grow tables, irrigation lines, or other sensitive areas.

Main features and advantages include:

• Length of 16 ft, approximately 4.88 meters.
• Designed for use with WD-1 TrolMaster water detectors.
• Male connector on one end and female on the other.
• Allows you to extend the distance between two sensors.
• Allows you to extend the separation between the WD-1 and the sensor.
• Plug & Play connection system.
• Environmental range indicated by the manufacturer of approximately 0 to 50 °C.
• Ready to work in environments with up to 90% relative humidity.
• Compatible with professional installations and authorized grows.

Another relevant point is integration within the TrolMaster control ecosystem. The brand offers different solutions for irrigation, monitoring, and detection, so using the specific reference indicated for each device helps maintain system compatibility.

Among INDOOR GROW ACCESSORIES, this type of extension may seem like a simple component, but it is practical when an installation grows or changes layout. Adding distance to the sensor can avoid having to relocate controllers, modify main wiring, or limit the points where it is important to detect the presence of water.

Price Cable extension 16 + touch spot (TSS-2) Trolmaster

The price of the Cable extension 16 + touch spot (TSS-2) Trolmaster can be checked directly in our online store. On the product page you will find the updated price, availability, and any current promotions.

When comparing this product with other cables, it is important to check the TSS-2 reference and compatibility with the WD-1 Water Detector. TrolMaster sells different extensions for different sensors and modules, so not all cables serve the same function.

At Hydroponics Blanes, trusted Grow Shop, we work with a selection of Trolmaster accessories for indoor grow installations, automation, and control. Orders are prepared with discreet shipping and suitable packaging to protect the components during transport.

Where to buy online Cable extension 16 + touch spot (TSS-2) Trolmaster?

You can buy the Cable extension 16 + touch spot (TSS-2) Trolmaster at Hydroponics Blanes through our online grow shop. We have different components intended for TrolMaster systems, as well as automation, measurement, irrigation, and environmental control solutions for authorized installations.

Before completing your order, we recommend verifying the reference of the device where the extension will be connected. This model is designed to work with WD-1 water detectors, extending the distance between sensors or between the detector module and the corresponding detection point.

Our INDOOR GROW ACCESSORIES catalog includes different Trolmaster accessories that allow you to configure systems adapted to small, medium, and professional installations. Orders placed online come with discreet shipping and support to resolve compatibility questions before purchase.

The Cable extension 16 + touch spot (TSS-2) Trolmaster offers a direct solution to gain approximately 4.88 meters of distance within the WD-1 water detection system. With male/female connection, Plug & Play operation, and specific compatibility with TrolMaster detectors, it allows better distribution of control points in authorized installations. Available at Hydroponics Blanes, trusted Grow Shop, with online purchase