Can-Lite 425 m3/h S Filter, 150 mm Can-Fan

Filter for grow cabinets Can-Lite 425 m3 S 150 mm.

The Can-Lite 425 m3 S 150 mm. Filter offers an effective solution for extracting clean air in small spaces. The bed of virgin Australian activated carbon (1.90 kg) adsorbs volatile organic compounds responsible for odor, delivering discreet and stable ventilation.

The set weighs 4.00 kg and features dimensions 20 × 35 cm, a manageable format for indoor grow cabinets of 60×60, 80×80 or 100×100 cm.

The performance is sized for optimal flow rate 425 m³/h and tolerates up to 467 m³/h in well-balanced configurations.

The cylindrical microperforated design promotes airflow without bottlenecks, while the included prefilter sleeve captures dust and lint, extending the effectiveness of the adsorbent medium. With basic maintenance (washing or replacing the prefilter between cycles), performance can be extended up to 18 months, always depending on hours of use, humidity, and particle load.

The Ø150 mm flange ensures direct compatibility with standard extractors and ducts within the cannabis cultivation accessories ecosystem.

This model stands out in installations where acoustic and aromatic discretion is a priority, integrating cleanly into short extraction lines with few bends.

Indoor Cultivation Filter Can-Lite 425 m3 S 150 mm.

In compact indoor cultivation environments, controlling odor is as important as renewing air or managing temperature. The Can-Lite 425 m3 S 150 mm. Filter keeps extraction clean in 1 m² cabinets, accompanying low-medium power LED/HPS lights without penalizing the nominal flow.

What is the Can-Lite 425 m3 S 150 mm. Filter for?

It is designed to neutralize odors in indoor crops. Air passes through the activated carbon bed and aromatic molecules are retained. Result: discreet extraction in homes, premises, and storage rooms, even with especially aromatic varieties.

Indoor cultivation accessory Can-Lite 425 m3 S 150 mm. Filter

Key part of the ventilation system along with Ø150 extractors, flexible ducts, clamps, reducers, and silencers. The lightweight format facilitates top or side mounting, optimizing space in indoor grow cabinets without adding excessive loads to bars or ceilings.

When to use the Can-Lite 425 m3 S 150 mm. Filter?

Recommended from seed or cutting to keep the environment clean throughout the cycle. It provides critical value in pre-flowering and flowering, stages with higher aromatic emission. Also useful in pruning, transplants, and biomass handling, moments when odor can intensify.

Instructions for use Can-Lite 425 m3 S 150 mm. Filter

Install at the beginning of the extraction circuit, inside the cabinet, in line with a 425 m³/h extractor (compatible up to 467 m³/h). Connect using Ø150 mm duct and clamps to ensure tightness. Orient the flow so that air enters through the mesh and passes evenly through the carbon bed. Keep the prefilter sleeve clean; wash or replace between crops. Check joints and periodically check odor attenuation to decide on filter replacement when saturation appears.

Advantages of using Can-Lite 425 m3 S 150 mm. Filter

• Compact and lightweight format (4.00 kg) ideal for 1 m² cabinets.
• Virgin Australian activated carbon for high adsorption capacity.
• Optimal flow rate 425 m³/h with tolerance up to 467 m³/h.
• Prefilter included that extends performance up to 18 months.
• Direct compatibility with Ø150 ducts and extractors.

Where to buy a Can-Lite 425 m3 S 150 mm. Filter online?

Available at Hydroponics Blanes, Grow Shop in Spain with a wide range of ventilation for indoor cultivation, cannabis cultivation accessories and indoor grow cabinets. Specialized attention and discreet shipping throughout the territory from a trusted Grow Shop.

The Can-Lite 425 m3 S 150 mm. Filter provides a balance between size, flow, and discretion for compact projects. With dimensions 20 × 35 cm, carbon 1.90 kg and washable prefilter, it solves aromatic control in 1 m² cabinets without complications. At Hydroponics Blanes you can find advice to match the filter with the right extractor, choose efficient ducts and complete the installation with kits, fertilizers and tools, always with discreet shipping and attention from a trusted Grow Shop.