RVK 200 mm Extractor L1 (1008 m3/h)

Indoor cultivation ventilation system - RVK Extractor 200 mm L1 (1008 M3/H)

The RVK Extractor 200 mm L1 (1008 M3/H) is designed to renew air continuously with great reliability. The high-strength plastic housing withstands humidity and prolonged work, while the centrifugal impeller ensures useful pressure to pass through carbon filters, elbows, and duct sections without losing performance.

The 200 mm flange facilitates integration with flexible or rigid ducting, reducers, and silencers of the most commonly used standard in technical gardening. The unit delivers 1008 m³/h and an approximate consumption of 159 W, balanced figures for installations seeking to reduce temperature peaks, evacuate excess humidity, and maintain homogeneous gas exchange.

Combined with proper filtration, it helps neutralize odors in LED cabinets and compact rooms.

At Hydroponics Blanes, Grow Shop in Spain, it is available along with controllers, clamps, aluminum tape, and a wide catalog of cannabis cultivation accessories and cheap indoor grow tents, with close advice from a true trusted Grow Shop and logistics with discreet shipping.

Indoor Cultivation RVK Extractor 200 mm L1 (1008 M3/H)

Well-sized extraction avoids hot spots, minimizes condensation, and keeps VPD in productive ranges. RVK Extractor 200 mm L1 (1008 M3/H) provides flow and pressure to stabilize temperature and humidity in medium cabinets or compact rooms, promoting vigorous growth and uniform drying.

What is the RVK Extractor 200 mm L1 (1008 M3/H) for?

• Continuous air renewal: removal of accumulated heat and vapor.
• Odor control: direct integration with 200 mm carbon filter according to flow rate.
• Available pressure: stable performance even with elbows, pre-filters, and medium runs.
• Efficiency: flow/consumption ratio designed for 24/7 operation.

Indoor cultivation accessory RVK Extractor 200 mm L1 (1008 M3/H)

Among the essential cannabis cultivation accessories, this reference stands out for its robustness, low noise, and full compatibility with the 200 mm ecosystem. The technical plastic body, balanced turbine, and clamp mounting allow for quick, clean, and safe installation in cabinets and mixed extraction rooms.

What is the RVK Extractor 200 mm L1 (1008 M3/H) used for?

Recommended use as the main extractor in 120×120, 120×240 cabinets or compact rooms (always sized by lighting power and duct length); as a regulated intake for supplying filtered fresh air in large spaces; and in drying rooms, where a continuous and gentle flow is advisable to avoid humidity spikes.

How to use RVK Extractor 200 mm L1 (1008 M3/H)

1. Calculate flow requirement: enclosure volume (m³) × air changes/hour (30–60 as a reference) and add losses for filter and elbows.
2. Place the extractor in a high area to evacuate hot air; place the intake at the bottom to create a homogeneous sweep.
3. Connect to 200 mm duct; seal joints with aluminum tape and secure with metal clamps to prevent leaks.
4. Attach 200 mm carbon filter when odor control is a priority; choose a model compatible with 1008 m³/h.
5. Minimize sharp changes of direction; a straight run preserves pressure and reduces aerodynamic noise.
6. Check draft with manual test or anemometer; check for vibrations and adjust supports with anti-vibration elements.
7. Plan light maintenance: clean carbon pre-filter, check ducts, and periodically tighten clamps.

Advantages of using RVK Extractor 200 mm L1 (1008 M3/H)

• High flow of 1008 m³/h with stable centrifugal thrust.
• Operates in relative silence compared to axial solutions of equal flow.
• Total compatibility with 200 mm ducts, filters, and silencers.
• Low consumption close to 159 W prepared for continuous operation.
• Easy installation and minimal maintenance for prolonged use in Indoor cultivation.

Where to buy an RVK Extractor 200 mm L1 (1008 M3/H) online?

Available at Hydroponics Blanes, with the experience of a trusted Grow Shop, discreet shipping and everything you need: controllers, ducts, reducers, filters, and cheap indoor grow tents. Safe purchase at a Grow Shop in Spain with technical advice to properly size the ventilation.

For those seeking real climate stability, odor control, and quiet operation, RVK Extractor 200 mm L1 (1008 M3/H) more than delivers: resistant housing, useful pressure, and compatibility with 200 mm lines make installation efficient.

With the support of Hydroponics Blanes and logistics with discreet shipping, completing Indoor cultivation systems is agile, economical, and fully integrated with the rest of the available cannabis cultivation accessories.