Mini Controller Humi 7A - CLI-MATE

Mini-Controller Humi 7A CLI-MATE | Indoor control

The Mini-Controller Humi 7A CLI-MATE (also known as “Mini grower”) centralizes key indoor environment tasks: it times lights and heating, regulates air intake/extraction, and manages humidification or dehumidification with great precision.

It allows you to turn lights on and off using a quality timer in 15-minute intervals, operate up to 4 x 600 W of lighting, and control an additional heating or air conditioning unit of 1 x 3500 W, working with 7 AMP.

Temperature control is carried out by intake and extraction fans working in parallel, with easy minimum and maximum adjustment, plus adjustable hysteresis from 1º to 7º to avoid constant cycling.

When the reading exceeds the set threshold, extraction ramps up to the selected maximum and stays there until the setpoint is recovered. The module includes a hygrostat with two modes (humidify or dehumidify) and a 5 m remote sensor that provides a stable microclimate reading.

A main button with three positions (On–Off–100%) lets you choose automatic operation, total shutdown, or 100% extraction for immediate air renewal. Protection via fuse helps against voltage spikes.

This device integrates easily into domestic and professional projects, from cheap indoor grow tents to larger rooms, and is among the most complete cannabis cultivation accessories available at Hydroponics Blanes, a trusted Grow Shop with discreet shipping.

Indoor Cultivation Mini-Controller Humi 7A CLI-MATE

In indoor cultivation setups, climate stability determines yield and plant health. The Mini-Controller Humi 7A CLI-MATE coordinates photoperiod, air renewal, heat input, and relative humidity to maintain optimal ranges during growth and flowering, both in tents and technical rooms.

What is the Mini-Controller Humi 7A CLI-MATE for?

It serves to automate lighting, temperature, ventilation, and humidity from a single control point. It schedules light cycles, turns on heating when needed, sets hysteresis to avoid oscillations, activates humidifier or dehumidifier according to the set value, and keeps the environment within the parameters defined by the user.

Indoor cultivation accessory Mini-Controller Humi 7A CLI-MATE

This controller is one of the essential cannabis cultivation accessories: it reduces repetitive tasks, standardizes processes, and improves consistency from batch to batch. Compatible with extractors, intake fans, radiators, and conventional 600 W lighting equipment, it fits both cheap indoor grow tents and more complex setups without the need for additional modules.

When to install Mini-Controller Humi 7A CLI-MATE?

It is advisable to install it from the start of the project to ensure constant parameters from germination. It is especially recommended during periods of strong temperature swings or high/low humidity, in areas with heat spikes, or when scaling up to systems with several lights and the need for fine control of extraction and climate.

How to use Mini-Controller Humi 7A CLI-MATE

1) Fix the controller on a stable, accessible surface away from water.
2) Connect lighting (up to 4 x 600 W) to the timed outputs and set the photoperiod in 15 min intervals.
3) Connect heating or air conditioning (up to 3500 W) to the designated channel and set the target temperature.
4) Connect intake and extraction fans, adjust minimum/maximum power, and select hysteresis between 1º and 7º to avoid short cycles.
5) Connect humidifier or dehumidifier, choose mode, and set the setpoint with the hygrostat.
6) Place the 5 m sensor at canopy height, away from lights and direct drafts, for a real reading of the environment.
7) Select on the main button: On (automatic), Off (off), or 100% (intake and extraction at full power).
8) Check protection via fuse and run on/off tests before leaving it in automatic mode.

Advantages of using Mini-Controller Humi 7A CLI-MATE

• Three functions in one device: timer for lights/heating + climate with hysteresis + humidity control.
• Power and capacity: 4 x 600 W lighting + 1 x 3500 W heating/AC, managed at 7 AMP.
• Precision: 5 m remote sensor, adjustable hysteresis from 1º to 7º, and minimum/maximum extraction adjustment.
• Quick response: 100% mode for immediate air renewal and peak stabilization.
• Operational efficiency: fewer manual interventions and greater environmental uniformity.

Where to buy a Mini-Controller Humi 7A CLI-MATE online?

Available at Hydroponics Blanes, a trusted Grow Shop and leading Grow Shop in Spain, with discreet shipping 24/48 h. Catalog with cannabis cultivation accessories, ventilation, environmental control, and cheap indoor grow tents to set up complete installations with specialized support.

Mini-Controller Humi 7A CLI-MATE brings real automation to the indoor microclimate: it regulates light, extracts hot air, activates heating when needed, and manages humidity with precision.

A robust option to stabilize parameters and improve results, available at Hydroponics Blanes with discreet shipping and the attention of a trusted Grow Shop.