Fan Controller with Thermostat 4A CLI-MATE

Fan Controller with 4A CLI-MATE Thermostat for grow rooms

The Fan Controller with 4A CLI-MATE Thermostat is an analog regulator designed to maintain stable conditions in grow tents and rooms. It integrates a minimum speed dimmer and a thermostat with a range of 0–40 ºC, allowing AC fans or extractors to work continuously at the minimum required and increase power when the temperature exceeds the setpoint.

With a capacity of 4 A at 220/240 V–50 Hz, it is suitable for a wide range of single-phase ventilation equipment, maintaining efficient air flow management during growth, flowering, drying, or technical rooms.

The housing with IP44 protection helps against environmental humidity typical of cultivation. Operation is very intuitive: one knob sets the desired temperature and the other defines the minimum ventilation to ensure constant renewals, odor control with carbon filters, and VPD balance around the canopy.

This controller easily integrates with Sonoconnect/Aluconnect ducts, silencers, clamps, and reducers commonly used in cannabis cultivation accessories.

At Hydroponics Blanes, Grow Shop in Spain and trusted Grow Shop, there is technical advice, discreet shipping and 24/48 h delivery (depending on stock) with free shipping from €40 (max. 25 kg), perfect for equipping cheap indoor grow tents.

Indoor Cultivation Fan Controller with 4A CLI-MATE Thermostat

In indoor cultivation environments with lighting that raises the temperature, this controller allows you to set base ventilation and activate an automatic response when the thermostat detects a temperature increase. In this way, accumulated heat is evacuated from the top of the tent, humidity is stabilized after watering, and constant gas exchange is promoted.

What is the Fan Controller with 4A CLI-MATE Thermostat for?

It is used to regulate the speed of fans or extractors according to the desired temperature, maintain a continuous minimum flow and avoid abrupt fluctuations. It helps control odor by connecting carbon filters and reduces energy consumption by not always working at maximum power.

Indoor cultivation accessory Fan Controller with 4A CLI-MATE Thermostat

It works as the brain of the ventilation system: it coordinates extraction, injection, and recirculation when combined with flexible ducts, silencers, reducers, and filters. The analog format with two knobs offers precise adjustments without the need for digital menus, ideal for quick setups and easy maintenance.

What is the Fan Controller with 4A CLI-MATE Thermostat used for?

• Dynamic extraction: automatic increase of flow when the temperature exceeds the setpoint.
• Balanced intake: control of fresh air entry to maintain VPD and CO₂ replenishment.
• Drying and post-harvest: smooth and constant flow to avoid overdrying.
• Technical rooms: stable ventilation of ballasts, controllers, and electrical equipment.

How to use Fan Controller with 4A CLI-MATE Thermostat

• Installation: connect single-phase fan or extractor (up to 4 A) to the controller socket; plug into 220/240 V–50 Hz mains.
• Probe placement: place the sensor at canopy height, away from direct light and drafts for reliable readings.
• Initial adjustment: set target temperature (general recommendation: 24–26 ºC day, 20–22 ºC night) and minimum speed to ensure renewals.
• Response test: check that, when temperature increases, the controller increases speed; seal duct joints with aluminum tape.
• Maintenance: periodically check filter cleanliness, wiring condition, and fixings; keep away from splashes from watering.
• Environment: use indoors with controlled humidity; housing with IP44 for cultivation environments.

Advantages of using Fan Controller with 4A CLI-MATE Thermostat

• Thermal stability: constant climate thanks to 0–40 ºC thermostat.
• Energy efficiency: operation at adjustable minimum when the environment is within the desired range.
• Wide compatibility: single-phase AC fans and extractors up to 4 A.
• Easy handling: two control knobs for setpoint and minimum ventilation.
• Quick integration: perfect with cannabis cultivation accessories, carbon filters, ducts, and silencers.
• IP44 protection: resistance against typical cultivation environmental humidity.

Where to buy a Fan Controller with 4A CLI-MATE Thermostat online?

Available at Hydroponics Blanes, trusted Grow Shop with a wide catalog and specialized technical support. Store with discreet shipping, 24/48 h delivery (depending on stock) and free shipping from €40 up to 25 kg in mainland Spain. Ideal option to complete installations with cheap indoor grow tents and controlled ventilation.

The Fan Controller with 4A CLI-MATE Thermostat stands out for its simple and immediate thermal control, minimum speed regulation, 0–40 ºC range, 4 A capacity, 220/240 V–50 Hz and IP44 rating. A reliable tool to stabilize the climate in indoor cultivation, available at Hydroponics Blanes, Grow Shop in Spain with expert advice and discreet shipping.